Festool RS 2 E Orbital Sander

RS 2 E Orbital Sander 567669

Light surface sander
The large 4 1/2" x 9" (115 x 228 mm) sanding surface and a 3/32" (2.5 mm) sanding stroke makes the RS 2 the perfect choice for fine sanding large surfaces. Typical applications include intermediate sanding of varnished doors, leveling large surfaces, and fine sanding of delicate stock. An additional ergonomic hand grip enhances controllability and reduces fatigue during long sessions. This sander is especially good for applications that require an absolutely even surface (like tabletops).

Variable Speed

Step-less speed control allows you to adjust to the needs of the application

Vibration-Stop

Balanced design delivers better finish results, smooth operation and greater comfort

Optimum Sanding Stroke

A tight sanding stroke for efficient sanding action for intermediate and fine sanding

Turbo Dust Extraction

Integrated dust extraction system can be used with Turbo dust bag set or with CT dust extractors.
Large Rectangular Pad

With a 4 1/2" x 9" pad, the RS 2 handles large surfaces quickly and evenly

Works With Sheet Abrasives

Abrasive clamping lever allows for the use of non-StickFix and 1/2 sheet abrasives

StickFix Sanding Pad Hook & Loop Design

Fast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing, leading to longer abrasive and pad life.

567669 Parts

Delta 12" Variable-Speed Bench Drill Press DP350

DP350

1/3 HP Induction Motor for Long-Lasting, Smooth Performance
Pivoting motor mount maintains correct belt tension and facilitates speed changes
Three-spoke pilot wheel for operator convenience
Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling
Tilting table with slots for fast clamping of work
Standard 3-jaw, 1/2" capacity chuck for positive gripping of various drill press cutting tools

Motor: 1/3 HP, 120V, 1 Phase, 60 Hz
Motor Control: Push Button Switch
Speeds: Variable: 500-3,100 rpm
Table Size: 8-1/2"x9-7/8 "
Table Tilt: L and R: 90° °
Table Insert: NA
Column Diameter: 2-3/8 "
Spindle Taper: Jacobs 33
Chuck Taper: Jacobs 33
Quill Diameter: 1-1/2 "
Quill Stroke: 3-1/4 "
Key Chuck Capacity: 1/2 "
Chuck to Table Capacity: 14-1/8 "
Chuck to Base Capacity: 19 "
Height: 22 "
Width: 11 "
Depth: 37 "
Weight: 78 lbs
Shipping Weight: 110 lbs

DP350 Parts

Bosch 4" x 24" Belt Sander 1276D

4" x 24" Belt Sander
1276D
Features
10.5 Amps, 1,550 SFPM power
Rugged design — Specifically built for production sanding jobs, as well as jobsite applications
Magnesium transmission housing reduces tool weight
Adjustable front handle — Folds away for close work
Exclusive adjustable dust intake port — Allows use of non-woven belts up to 8mm thick
Sands flush to vertical surfaces — For sanding versatility
Lever-action belt release — For quick belt release
Belt Tracking Adjustment Knob
Steel Platen Protector Pad
Replaceable wear inserts — Protects housing from damage
Accepts optional sanding frame, stand and fence — For added versatility and accuracy
Tool Specifications
Amperage: 10.5
Assembled In: USA
Belt Size: 4" x 24"
Length: 13.8"
No Load SFPM: 1,550
Rating: 120V AC
Weight (lbs.): 13.5
Includes
Dust Bag Assembly -- SA1050
Sanding Belt -- Included

1276D Parts

Wilton 2" X 42" BENCH BELT AND DISC SANDER 41002

2" X 42" BENCH BELT AND DISC SANDER 41002
Deluxe miter gauge that turns and locks for common angles 45? both left and right
Hinged idler wheel cover
Abrasive belt unit does the work of a jig saw, coping saw or hand file while removimg material and finishing at the same time, allows the operator to get into small openings, plus handle odd shapes and angles
Allows for sanding, grinding or finishing of outside, curves or odd shaped work pieces on the belt
Grind, sand or finish large work pieces on the disc unit fast and efficiently; combined with the tilting table, the operator has the advantage of chamfering or beveling, table is slotted to accept miter gauge
Deilvers sharper, faster cutting action; easy belt changes with a variety of grit belts, keeps the machine cool, so one can complete a wide range of jobs
When using non-woven synthetic belts the operator can blend, polish, buss or finish metal surfaces in addition to defuzzing wood surfaces
Deluxe miter gauge
Cast iron tilting table
Cast construction
Heavy duty steel base and rubber feet
Removable platen
Dust deflector and chute

Brand
Wilton
Overall Dimensions
20-1/2 x 22-3/4 x 20
Height
23.1 inch
Width
16.7 inch
Length
16 inch
Net Weight
69.15 pound
Motor
3/4HP, 115V, 1Ph
Belt Size
2 x 42
Belt Speed
3100 sfpm
Belt Table Size
10 x 6
Disc Table Size
10-3/4 x 7-1/2
Belt Table Tilt
0 to 45°
Disc Diameter
8 "
Disc Speed
3450 RPM
Dust Collection Outlet Diameter
1-1/2

41002 Parts

Milwaukee Adjustable Position Electromagnetic Drill Press with 3/4 in. Motor 4206-1

The Milwaukee Advantage
This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.

Adjustable Position Electromagnetic Drill Press with 3/4 in. Motor Milwaukee 4206-1

Features
3/4 inch capacity, 12.5 amp motor, 350 RPM
Solid state electronic switching
Feedback speed control
Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line
Specifications
Voltage
120 AC
Amps
12.5
Drill Capacity
3/4 in.
No Load Speed
350 RPM
Cord Type
9 ft. Fixed
Construction Type
Grounded
Electronic Feedback
Yes
Tap Capacity
1 in.-14
Drill Point Pressure
1,630/1,670 lbs.
Adjustable Base
Yes
Drill Travel
11 in.
Chuck or Taper
Chuck
Tool Weight
70.0 lbs.
Shipping Weight
78.0 lbs

4206-1 Parts

Makita Nibbler JN3200

Nibbler JN3200

Powerful 6 AMP motor for continuous operation in mild steel up to 10 gauge and up to 12 gauge in stainless steel
Built-in thickness gauge for convenience
All ball and needle bearings for longer tool life
Easy punch and die replacement for less down time

INCLUDES:
Punch (792728-1)
Die (792292-2)
Hex wrench (783201-2)
Wrench (781019-5)
Steel tool case (181795-5)
Capacity
Steel
10 ga.

Stainless
12 ga.
AMPS

6.0
Strokes/min.(SPM)

1,300
Min. Cutting Radius
Outside edge
5-1/16"

Inside edge
4-3/4"
Length

8-1/2"
Net Weight (lbs.)

7.5
Shipping Weight (lbs.)

10.8
UPC Code

088381001380

JN3200 Parts

LEX 2 150/7 Air Sander 691125

Finish sanding refinedA satisfying finish is the reward of the right prep work. The secret to the best finish is to use a combination of the right technique and abrasives with the right sander. The LEX 2 150/3 and LEX 2 150/7 offer a very tight sanding stroke to minimize scratch patterns beyond what the human eye can see and what the hand can feel. A good finish is more than a stain, a sealer, or paint, it is a surface that is absolutely smooth to the touch.

LEX 2 150/7 Air Sander 691125

Ergonomics

Formed to fit your hand with rubberized top grip cap and unobtrusive dead-man switch.

Variable Speed

Step-less speed control allows you to adjust to the needs of the application.

IAS 2 Connection

3-in-1 hose design; supplies air, extracts dust, and provides an exhaust all through one hose.

Dust Extraction

Jetstream design delivers highly efficient dust removal, resulting in cleaner air, better finishes, and longer abrasive and pad life.

1/8" Stroke
The LEX 2 150/7 is distinguished by its stroke length which is designed for intermediate sanding

Pad Brake

Stops the pad quickly, so you can worry less about damaging your freshly finished workpiece when setting your tool down

StickFix Hook & Loop Design

Fast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing, leading to longer abrasive and pad life

Includes
Abrasive sheet

Cleaning and lubrication oil

Sanding pad

Specifications
Air consumption at rated load
14 CFM
Flow Pressure
87 psi
Pad diameter
6" (150 mm)
Sanding stroke
9/32" (7 mm)
Strokes per minute
16000 max.
Weight
2.9 lbs. (1.3 kg)

691125 Parts

6300-01 Multi-Max™ Dremel

Dremel 6300-01 Multi-Max™
The Dremel Multi-Max Oscillating Tool offers do-it-yourselfers and pros a versatile and effective multitasking tool. With fast side-to-side motion, the Multi-Max can take on a variety of projects that involve repair, remodeling, or restoration. Click to View Multi-Max Video Projects
Repair. Remodel. Restore.™
Optimal Control. Safe Operation. High Precision. Minimal Dust.
For cutting, grinding, sanding, scraping and grout removal. See kits for this tool

Features

Powerful 1.5 amp motor – cuts through 1 ¼” oak door jamb
Compact design – provides access to tight spaces
Quick Fit™ feature – for faster accessory change
Separate on/off switch – maintains speed setting after tool is shut off
Ergonomically optimized soft grip for comfort and control
10,000 – 21,000 OPM wide speed range – for optimal control
Electronic feedback circuitry for consistent speed under load

Specifications

Amperage 1.5 A
Cord Length 6 ft.
Oscillating Angle L / R 1.5 °
Speed Variable (10,000 - 21,000 OPM)
Tracking Tag multi033
Voltage 120V, 60Hz
Warranty 2 years
Weight (lbs.) 1.9

12" Disc Sander with Integral Dust Collection 31-120

12" Disc Sander with Integral Dust Collection 31-120

Powerful 1/2 HP, 120V motor for long-lasting, smooth performance
Manual brake stops sanding disc in seconds
Heavy-duty, steel disc plate features a 12" diameter, 80-grit abrasive disc for fast, efficient sanding
Tilting cast-iron table with 90° and 45° positive stops lock in position with spring-loaded, table-locking handles
Cast-iron base with pre-drilled base holes for easy bench mounting
Dust hose with 2-1/4" O.D. connectors attaches quickly to any standard shop vacuum
Integral dust collection fan draws dust away from table and into hose for cleaner sanding operation
The DELTA® 12" Disc Sander features a 3/8"x3/4" miter gauge slot machined into the table for projects that require sanding an angle or straight edge

Motor: 1/2 HP, 120V, 1 Phase, 60 Hz, 1,725 rpm
Stroke: NA "
Strokes/Min: NA spm
Drum Size: NA "
Spindle Diameter: NA "
Speed: 1,725 rpm
Abrasive Belt Size: NA "
Disc Diameter: 12 "
Table Size: 17-1/4"x6-1/4 "
Table Insert: NA
Dust Collection Outlet: 2-1/4" "
Table Tilt: Up and down 45º °
Miter Gauge Groove: 3/8"x3/4"
Height: 15 "
Length: 17.75 "
Width: 17.25 "
Weight: 72 lbs
Shipping Weight: 81 lbs

31-120 Parts

Bosch 7-1/4" Worm Drive Construction Saw with Direct Connect™ 1677MD

7-1/4" Worm Drive Construction Saw with Direct Connect™

Bosch 1677MD

Features
15 Amps
50° bevel capacity — with positive stop at 45°
Anti-snag lower guard — To minimize snagging in wood
Die cast magnesium footplate — For greater strength
Direct Connect™ — Saves user time and money on jobsite with no end-plug snagging, easy cord repairs, and easy tool storage.
Easy servicable brushes
Left side blade design
Magnesium housing
Saw hook — For easy storage between cuts
Spindle Lock
Texture soft grip
Unmatched line of sight & blade visibility
Tool Specifications
Amperage: 15
Arbor Size: Diamond Arbor
Blade Diameter: 7-1/4"
Depth of Cut at 45 Deg.: 1-15/16"
Depth of Cut at 50 Deg.: 1-13/16"
Depth of Cut at 90 Deg.: 2-3/8"
No Load RPM: 4,400
Rating: 120 V
Includes
24 Tooth Carbide Blade -- WD724B

1677MD Bosch Parts

Powermatic PM3000 14" Table Saw, 7.5HP 3PH, with 50" Accu-Fence System 1720305K

PM3000 14" Table Saw, 7.5HP 3PH, with 50" Accu-Fence System Powermatic 1720305K
Details
Quick release riving knife greatly reduces binding/kickback risk
Push button arbor lock (patent pending) for rapid blade change
Poly-V drive belt system delivers efficient, quiet operation
Wide stance heavy-duty trunnion for stability and smooth blade positioning
Adjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cuts
Industrial-duty Accu-Fence® System ensures accurate cuts
Enclosed cabinet with wide footprint for stability
Heavy-duty micro adjustable miter gauge with aluminum extruded fence, for good workpiece guidance and fine angle adjustments
Precision ground high luster cast iron table top with front edge bevel prevents snagging of workpiece while positioning
Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
Jumbo stop switch offers fast access to controls
Built in 4" port for dust collection
Standard Equipment:
TEFC motor with magnetic controls
Standard left and right cast iron table wings
Accu-Fence® System with 50" to the right cutting capacity
Extension table and legs
Arbor wrench
Motor cover
Blade, power cord plug not included

Part Number=1720305K
Blade Diameter=14 "
Arbor Diameter=1 "
Arbor Speed=3450 RPM
Maximum Depth of Cut=5 1/8 "
Maximum Depth of Cut at 45 Degrees=3½ "
Maximum Rip Right of Blade=50 "
Maximum Rip Left of Blade=14 "
Table in Front of Saw Blade at Maximum Depth of Cut=15½ "
Maximum Width of Dado=13/16 "
Maximum Diameter of Dado=8 "
Table Type=Polished cast iron
Table Height=35 "
Table Size with Standard Extension (L x W)=38 x 48 "
Table Size without Extension (L x W)=38 x 26 "
Rapid Wing Extension=n.a.
Table Size without Wings (L x W)=38 x 26 "
Dust Port Outside Diameter=4 "
Dust Collection Minimum CFM Required=350 cu.ft/min
Dust Collection Adapter Port=n.a.
Leg Stand with Steel Storage=n.a.
Miter Gauge Type=Deluxe, micro adjustable with Aluminum extruded fence
Motor Power=7½ HP
Motor Voltage=230 / 460 V
Prewired Voltage=230 V
Wiring Remarks=460 V requires optional 460 V mag switch
Motor Phase=3 Ph
Model Number=PM3000
Brand=Powermatic
Overall Dimensions=84 x 53 x 42
Height=42 inch
Width=53 inch
Length=84 inch
Net Weight=750 pound
Optional Part #
Description
1791080
Zero Clearance Insert for PM3000
1791081
Dado Insert for PM3000
WARRANTY AND SERVICEWMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.For more informaton click HERE Specifications

PM3000 Powermatic Parts 1720305K

Milwaukee 11 Amp Sawzall® Plus Recip Saw 6519-22

11 Amp Sawzall® Plus Recip Saw Milwaukee 6519-22

Features
Powerful 11 amp Milwaukee-built motor
Variable speed trigger: 0-2800 strokes per min.
Gear protection system
Heavy duty steel QUIK-LOK™ blade clamp system for easy blade changes
Keyless adjustable shoe
Double bearing wobble plate mechanism
Rubber boot for superior gripping
Double insulated
Uses standard 1/2 in. shank Sawzall® Blades - blades may be clamped upside down for special cutting needs
Impact resistant carrying case
Specifications
Voltage
120 AC
Amps
11.0
Stroke Length
1-1/8 in.
No Load Speed
0-2,800 SPM
Cord Type
8 ft. Fixed
Construction Type
Grounded
Switch Type
Trigger
Dial Speed Control
No
Keyless Blade Clamp
Yes
Keyless Adj Shoe
Yes
Adjustable Handle
No
Orbital Action
No
Counter-Balance
No
Impact Protection
Yes
Length
17-3/4 in.
Tool Weight
7.0 lbs.
Shipping Weight
11.3 lbs.
Includes
Carrying Case
One Super Sawzall® Blade
6519-22 Milwaukee Parts

Makita Chain Mortiser Model 7104L

Chain Mortiser Model Makita 7104L

Innovative power tool notches or cuts through-holes in thick wood stock quickly, neatly and accurately
Perfect for timber framing and log home building
Extremely portable at only 37.4 lbs.
Cuts lap joints up to 5-1/8"

Large adjustable vise for attaching firmly onto logs 3-1/8" to 12-1/8" thick
Sliding rear clamp adjustable to desired width with a quick adjust tension knob
Clamp tension lever for a firm hold on log
Plunge depth adustment in 1/8" increments
Cutting line indication plate
Adjust knob for re-adjusting position of chain across the log
Quick horizontal chain lever for widening holes
Chain tension adjustment cover with snap action
Professional 12 AMP motor
Razor sharp chain to quickly notch or cut holes
Durable plastic boot protects twin steel rails
Externally accessible carbon brushes for easy serviceability
Built-in carrying handle for ease of transportation

INCLUDES:
23/32" (18.25 mm) Cutter Chain (A-16570)
Wrench (781204-0)
100 cc Oil Supply (182229-1)
Capacity



Max Hole Width (Longitudinal)
5-1/8"

Max. Hole Width (Transverse)
7-1/4"

Max. Hole Depth
6-1/8"
No Load RPM

3,200
Chain Speed (ft./min.)

1,000
AMPS

10.5
Size

15-1/4"x11-3/4"x20-1/4"
Cord Length

16.4’
Net Weight (lbs.)

37.4 lbs.
Shipping Weight (lbs.)

44.0
UPC Code

088381065955

7104L Makita Parts

DeWalt 1-1/8" SDS Hammer Kit - D25404K

1-1/8" SDS Hammer Kit - Dewalt D25404K
Features:
8.3 Amp motor provides high performance and overload protection
Hard-hitting hammer mechanism for fast and efficient penetration
Fully sealed gearbox is engineered for long life by keeping grease in and dust out
Accepts SDS bits from 5/32" to 1-1/8"
Higher drilling capacity than compact drilling hammers for increased productivity in 1/2" & larger applications
Less weight than large drilling hammers reduces user fatigue in 5/8" & smaller applications
Chipping (Hammer-only) mode allows user to perform light chipping applications, such as removal of mortar splatter
Rotation-only mode for wood and metal drilling (using SDS-to-Round Shank Adapter)
Warranty Information
Concrete Drilling
1-1/8 "
Impact Energy
3.34 ft-lbs
Switch
VS
Chipping
Yes
Wood/Steel Drilling
1.5 / .5 "
No Load Speed
0-730 rpm
Blows/Min
0-4,100 bpm
Clutch
Yes
Tool Length
15.25 "
Tool Weight
10.75 lbs
Amps
8.3 Amps
Includes:
360° side handle
Depth rod
Kit Box

D25404K Dewalt Parts

Delta 3 HP Dust Collector 2700 CFM 50-762

Delta 50-762 3 HP Dust Collector 2700 CFM

Standard 1 micron filtration bags keep your shop safer and cleaner
Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust
Snap-in bag rings are faster, easier and eliminate the need for cam-over-lock style clamps
6 mil plastic chip collection bags show you when the bags need emptying
Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way

Specifications

Motor: 3 HP, 3,450 rpm, 230/460V (Wired 230V), 3 Phase, 60 Hz
Max. CFM: 2700 CFM
Max. Static Pressure: 10.5 (inches of water)
Impeller Diameter: 13 "
Filter Bag Area: 57.2 sq ft, 5.3 sq m
Standard Bag Filtration: 1 Micron
Chip Bag Area: 7.6 cu ft, 218 L
Length: 66 "
Width: 23 "
Height: 110 "
Weight: 186 lbs
Shipping Weight: 190 lbs

Delta Parts 50-762

Bosch 10″ Worksite Table Saw with Digital Rip Fence and Gravity-Rise™ Wheeled Stand

Bosch 4100DG-09, 10″ Worksite Table Saw with Digital Rip Fence and Gravity-Rise™ Wheeled Stand.

Features
Digital Measuring Display Precise and durable high-visibility LCD gauge and display that magnetically attaches to SquareLock™ Rip Fence. Measures within 1/32″ or 0.5 mm for accurate cuts.
Gravity-Rise™ Stand Patented for easy setup and take down of your table saw
Exceptional Portability Quick and easy transport betwen jobsites
Heavy Duty Construction Built to last with powder coat paint finish for longevity
8" Treaded Pneumatic Wheels Handles the toughest and unexpected jobsite terrains
Collapsible Design Minimizes storage space requirements
Tool Specifications
Amperage: 15
Arbor Size: 5/8"
Bevel Angle Range: -2° to 47°
Blade Diameter: 10"
Country of Origin: Taiwan
Description: 10″ Worksite Table Saw with Digital Rip Fence and Gravity-Rise™ Wheeled Stand
Dimensions: 39.13 x 30 x 20.9
Max. Motor HP: 4.0
No Load RPM: 3,650
Weight (lbs.): Saw - 60 lbs. (with Stand 99 lbs.)
Working Length: Table Top dimensions 29" x 21-1/2"
Includes
Gravity-Rise™ Table Saw Stand With Pneumatic Wheels
Digital Measuring Display - DC010

4100-09 Bosch Parts

Jet J-4002 1 x 42 BENCH BELT & DISC SANDER

Jet 577003, J-4002 1 x 42 BENCH BELT & DISC SANDER

Features

Hinged idler wheel cover
Power take off, allows for mounting an optional flex shaft, can be used for carving, drum ssanding, deburing and dozens of other jobs
Deluxe miter gauge turns and locks for common angles 45° left and right
Abrasive belt unit does the work of a jig-saw, copying saw or hand file while removing material and finishing at the same time, allows the operator to get into small oppenings plus handle odd shapes and angles
Removable platen allows for sanding, grinding or finishing of outside curves or odd shaped work pieces on the belt
Grind, sand or finish large work pieces on the disc unit fast and efficiently; combined with the tilting table, the operator can chamfer or bevel, table is slotted to accept miter gauge
Delivers sharper, faster cutting actions; easy belt changes and a variety of grit belts, keeps the machine cool, so one can complete a wide range of jobs
When using non-woven synthetic belts the operator can blend, buff or finish metal surfaces in addition to defuzzing wood surfaces
Deluxe miter gauge
Cast iron tilting table
Cast construction
Heavy duty steel base and rubber feet
Removable platen
Adjustable dust deflector and dust chute

Specifications
Model Number
J-4002
Brand
Jet
Height
14 inch
Width
21 inch
Length
22 inch
Net Weight
62 pound
Motor
1/3HP, 115VAC, 1ph
Belt Size
1 x 42
Belt Speed
3000 sfpm
Belt Table Size
6-1/8 x 7-1/8
Disc Table Size
4 x 10
Belt Table Tilt
45° out
Disc Table Tilt
45° out
Disc Diameter
8 "
Disc Speed
1725 RPM
Dust Collection Outlet Diameter
1-1/2
Machine Dimensions
15 x 24-1/2 x 19-1/2

577003 Jet Parts

Makita 18V LXT Lithium-Ion Cordless Jig Saw Kit BJV180

BJV180 Makita Jigsaw

Low vibration and noise level for more control and comfort
4-Pole Position cut settings (3 Orbital and 1 Straight) for fast and efficient cutting in all applications
Built-in L.E.D. lights for more illuminated work
"Tool-less" push-in lock system for extremely fast blade installation and removal

Large variable speed trigger allows for total cutting control (0-2,600 SPM)
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
25-minute Rapid Optimum Charger [Communicates with the battery throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger. It actively controls current, voltage, and temperature to optimize battery life.]
Accepts "T" (Tang) shank blades

INCLUDES:
1 ea. Blade Set (B-10, B-13, B-22)
Cover Plate (417852-6)
2 ea. LXT Lithium-Ion 3.0Ah Battery (BL1830)
Anti-splintering Device (192557-6)
Contractor Bag (821007-X)
25-minute Rapid Optimum Charger (DC18RA)
ALSO AVAILABLE:
BJV180Z (tool only)
Length of stroke

1"
Max. Cutting Capacity
Wood
5-5/16"

Steel
3/8"
Cut Settings

3 Orbital +Straight Cutting
Strokes/Min.

0 - 2,600 SPM
Bevel Capacity

45°
Lithium-Ion Battery

18VDC (3.0 Ah)
Length

10-1/8"
Net Weight

6.1 lbs.(w/battery)
UPC Code
BJV180
088381-078665

BJV180Z
088381-078672

BJV180 Makita Parts

FEIN Multimaster Start 250Q

Fein Multimaster Start Fein FMMStart

For beginners, who do not want to sacrifice professionalism in spite of being price conscious

FEIN MultiMaster Start - a fully-fledged FEIN MultiMaster, suitable for all applications, featuring the most important accessories for grinding, sawing and scraping.
In the lead through oscillation technology: unsurpassed versatility.
Optimum handling thanks to ergonomical design and low weight
Chuck with form-fitting mount provides high torque transfer.
Powerful 250 Watt motor with electronic speed control.
Integrated interface for adaptation of additional system accessories.
Extensive range of accessories available
INCLUDES:
1 FEIN MULTIMASTER FMM 250, 1 sanding pad, 5 of each type of sanding sheet, grain 80, 120 and 180, 1 universal E-CUT saw blade (29mm), 1 rigid stopping knife, 1 key and mounting bolts

FMM 250 Parts

Evolution Fury 14" TCT Multipurpose Chop Saw

Evolultion 14" TCT Multipurpose Chop Saw Fury 2
This incredible Chop Saw is the perfect machine to use when tackling robust applications. The FURY2 easily cuts Steel, Aluminum and Wood (even wood with nails), using just one blade and demonstrates more than generous cutting capacities.
Offering a maximum cutting depth of 4-3/4” and a 7” cutting width this saw provides a solution to a multitude of applications.
When cutting steel the FURY2 cuts cold, without the need for coolant and because the material is cold it can be handled and worked on immediately. The cut is fast, clean, and accurate, producing no burr and very few sparks.
Why would you buy a saw that only cuts steel? When you can buy a FURY2® Multipurpose Saw.


Technical Specifications
Motor (115v ~ 60 Hz)
1800w
Maximum Box Section 90° (1/4" Wall)
4-3/4" x 1"
Maximum Box Section 45° (1/4" Wall)
3-1/2" x 3-1/2"
Rectangle 90° (1/4" Wall)
4" x 7"
Rectangle 45° (1/4" Wall)
3" x 4-21/64"
Round 90° (1/4" Wall)
4-1/8"
Round 45° (1/4" Wall)
4-9/64"
RPM No Load
1450min -1
Recommended Maximum Duty Cycle
30mins
Sound Pressure Level (Under Load)
112.4dB(A)
Weight
55.2lbs
Maximum Dimensions (HxWxD)
23-5/8" x 11-13/16" x 22-5/8"
Blade Specifications
Maximum Diameter
14"
Bore Diameter
1"
Kerf (Thickness)
0.094" (3/32")
Number of Teeth
36

Parts List

DeWalt 20" Variable-Speed Scroll Saw - DW788

Dewalt DW788, 20" Variable-Speed Scroll Saw

Features:
Double parallel-link arm design dramatically reduces vibration and noise, for extremely accurate cuts
Exclusive tool-free blade clamps allow blade changes in seconds
On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm
Arm design pivots from the back of the saw to the front, shortening the arm movement for smoother, quieter operation
Arm lifts so blade can be easily threaded through the material for inside cuts
Unique arm design keeps the blade perpendicular to the work, dramatically reducing over or under cutting
Oversized, cast-iron table provides excellent material support and bevels 45° left and right
Warranty Information
Amps
1.3 Amps
Strokes/Min
400-1,750 spm
Stroke Length
3/4 "
Depth Of Cut (inches)
2 "
Tool Weight
56 lbs
Shipping Weight
64.5 lbs
Includes:
Hex Wrench
Blades

DW 788 DewaltParts

Delta 12" Variable-Speed Bench Drill PressDP350

Delta 12" Variable-Speed Bench Drill Press DP350

Features
The DP350 includes 1/3 HP, 120V Motor, tilting table, table raising mechanism, 1/2" Capacity Chuck and Key, belt and pulleys, light.

1/3 HP Induction Motor for Long-Lasting, Smooth Performance
Pivoting motor mount maintains correct belt tension and facilitates speed changes
Three-spoke pilot wheel for operator convenience
Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling
Tilting table with slots for fast clamping of work
Standard 3-jaw, 1/2" capacity chuck for positive gripping of various drill press cutting tools

Specifications

Motor: 1/3 HP, 120V, 1 Phase, 60 Hz
Motor Control: Push Button Switch
Speeds: Variable: 500-3,100 rpm
Table Size: 8-1/2"x9-7/8 "
Table Tilt: L and R: 90° °
Table Insert: NA
Column Diameter: 2-3/8 "
Spindle Taper: Jacobs 33
Chuck Taper: Jacobs 33
Quill Diameter: 1-1/2 "
Quill Stroke: 3-1/4 "
Key Chuck Capacity: 1/2 "
Chuck to Table Capacity: 14-1/8 "
Chuck to Base Capacity: 19 "
Height: 22 "
Width: 11 "
Depth: 37 "
Weight: 78 lbs
Shipping Weight: 110 lbs

DP350 Delta Parts

Bosch 6" Dual-Mode Random Orbit Sander/Polisher

6" Dual-Mode Random Orbit Sander/Polisher Bosch 12500DEVS

Features
Multiple-purpose sander with two sanding modes: Random orbit mode for normal stock removal or fine finishing and "Turbo" driven eccentric orbit mode for aggressive stock removal at 5x random orbit sander removal rate!
Mode selector switch — Quickly change between random orbit mode and "Turbo" mode
Powerful 6.5 amp motor with variable speed (3,100-6,650 OPM) — To match speed to work piece and task ensures fast smooth results on all surfaces
Soft Start — Reduces start-up torque
Constant Response™ circuitry — Maintains pad speed under heavy loads and protects against overloads
High-performance soft Microcellular Backing Pad - Conforms to contours, provides a fine finish
Integral pad dampening system — Helps prevent swirl marks for consistent fine finish
Rugged Die-cast Aluminum Gear Housing with exclusive dual-bearing pad mount - Long-life design eliminates wobble and vibration
Tapered Soft-Grip Top, plus ergonomic handles for comfort and control
Passive dust collection system — Vacuum cleaner and hoses required - accepts Bosch VAC001, VAC009 and VAC010 hoses or VAC002 hose adapter
Uses 6-Hole 6" hook and loop discs — Compatible with industry-standard discs
Tool Specifications
Amperage: 6.5
Country of Origin: Germany
Disc Size: 6" (150mm)
Eccentric Offset: 3/32" (2.5mm)
Height: 6"
Length: 12"
No Load OPM: 3,100-6,650
No Load RPM: (in turbo mode) 270-600
Rating: 120 V
Weight (lbs.): 5.3
Working Length: 6"
Includes
Dust Tube -- 2601328072
Soft Backing Pad -- RS6045
Ambidextrous Auxiliary Handle -- 2602025067
Sanding Disc -- Included
Pad Wrench, 5mm (stored on tool) -- 1907950006

12500DEVS Bosch Parts

SENCO PC1010 Compressor

PC1010 1.0 Horsepower

The SENCO PC1010 Senco Compressor is a 1 hp peak, 1 gallon, oil-less portable air compressor. At 20 lbs., this compressor is easy to carry and to use in a wide variety of applications.

SPECIFICATIONS
PC1010 1.0 Horsepower
Height: 10.3"Length: 14"Width: 12.5"Weight: 20 lbRecovery Time: 35 seconds Pump Up Time: 128 seconds CFM (100psi): 0.6 Horsepower: 1 Powersource: Electric Tank Storage: 1 gallon gallons Max Amp @ 115V: 4

FEATURES AND BENEFITS
One year warranty
Hand carry-ultra quiet and lightweight, only 20 lbs.
Direct drive motor/pump for efficient operation
Aluminum cylinder
1.0 gallon of air capacity
Standard equipment: regulator, pressure gauges, 1/4" universal coupler, air filter
Comfortable cushioned grip
Lubeless pump

Applications
Finish and Trim
Hobbies & Crafts

1010 Senco Parts

Jet JWP-208-3, 20" 5HP, 3Ph Planer 708584

JWP-208-3, 20" 5HP, 3Ph Planer Jet 708584

Four high-speed steel cutter knives produce faster, smoother cutting
Heavy-duty cast iron and steel construction for added strength and durability
Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs
Large, cast iron, precision ground table for precise workpiece support
Powerful 5 HP TEFC induction motor with three V-belt transmission for smooth and consistent power
Sets of three steel infeed and outfeed rollers to help in the prevention of snipe
Positive gear drive moves table quickly and accurately
Work table is precision-ground and polished for consistently smooth operation
Large handwheel with positive gear drive allows for quick and accurately table adjustments
1/16" increment height scale lets you make the most precise adjustments for fine cuts
5" dust port provides efficient chip and dust collection
One-piece welded steel base offers solid support and stability
Magnetic controls provide long life and reliability

Model Number
JWP-208-3
Brand
Jet
Overall Dimensions
26 x 36-5/8 x 41-3/8
Height
43 inch
Width
30 inch
Length
38 inch
Net Weight
774 pound
Maximum Planing
20 "
Maximum Planing Thickness
6 "
Maximum Full Width Depth of Cut
3/32 "
Minimum Planing Length
6¾ "
Cutterhead Diameter
3 3/16 "
Cutterhead Speed
5000 RPM
Feed Rate
24 and 31 FPM
Number of Knives
4
Table Size
25 3/4" x 20"
Dust Port Diameter
5 "
Dust Collection Minimum CFM Required
400 cu.ft/min
Blade Size
20" x 1" x 1/8"
Amps
15 A
Motor Power
5 HP
Motor Phase
3 Ph
Motor Voltage
230

708584 Jet Parts

Milwaukee 1-3/4 Max HP BodyGrip® Router 5615-20

Milwaukee 5615-20 1-3/4 Max HP BodyGrip® Router

Get the Upper Hand! with Milwaukee's BodyGrip® Routers featuring the industry's first tactile handgrip designed into the base of the router, a fast, accurate linear depth adjustment system, a patented above-the-table depth adjustment mechanism, and a carrying case with integral RouterStation™.Featuring a 1-3/4 max HP (11 Amp, 24,000 RPM) Milwaukee motor, these powerful and precise new routers give you the upper hand in all but the heaviest of cuts. The BodyGrip® design is a comfortable over-molded rubber grip wrapped around the base with an adjustable handstrap that allows for left and right-handed operation, and two over-molded palm-grip side handles for superior comfort, maneuverability and control.The exclusive linear depth adjustment features a large steel motor lock lever and depth adjustment gearing via a durable threaded screw integral to the motor itself. Both coarse and microfine adjustments are fast and accurate. The router sub-base includes a special access hole for a common 3/8 in. hex extension wrench for above-the-table depth adjustments, ideal for router table applications and eliminating the nuisance of reaching beneath table to set the cutter (or bit) height. This revolutionary system simplifies this once tedious process required with other designs and ensures that the switch and cord remain in the same optimal location.The kit version (5615-21) features an impact resistant carrying case with heavy-duty metal hinges, comfortable free-swinging handle, and on-board wrench and collet storage. Also included is an integral RouterStation™, a removable base that fastens quickly and securely to any work surface, providing convenient and reliable storage for the router and accessories. This patented design eliminates the need to change the depth setting or remove the bit altogether before storing the router.For the router user who prefers a trigger control we've created a D-handle version (5619-20). This unit features a durable glass-filled nylon handle with comfortable cushion-grip and a trigger switch with special lock-on button for continuous effortless operation.Take your pick or take them all. Get the upper hand on comfort and control today with Milwaukee's BodyGrip® routers.
Features
Exclusive BodyGrip® Design
1-3/4 Max HP, 11 Amp, 24,000 RPM Milwaukee Motor
Exclusive Linear Depth Adjustment System
1/4 in. and 1/2 in. premium self-releasing collets
Specifications
Voltage
120 AC/DC
Max HP
1.7
No Load Speed
24,000 RPM
Collet Dia
1/4 in.-1/2 in.
Amps
11.0
Cord Type
8 ft. Fixed
Construction Type
Double Insulated
Switch Type
Rocker
Dial Speed Control
No
Handle Style
BodyGrip
Electronic Feedback
No
Depth Adj Range
1-21/32 in.
Sub Base Dia
6 in.
Height
8-1/2 in.
Tool Weight
8.8 lbs.
Shipping Weight
10.8 lbs

5615-20 Milwaukee Parts

Makita 18V Cordless Rebar Cutter SC190DWDE

Makita SC190DWDE, 18V Cordless Rebar Cutter

Powered by 18V (2.6Ah) Nickel-Metal Hydride battery
Fast and effortless cutting speed in only 6 seconds
Head rotates 360° for different cutting positions
Ergonomic pistol grip handle for operator comfort and control.

Specifically designed to cut rebar and various steel rod
Fast and easy replacement of shear blades
"TCT" total control variable speed trigger
Push button forward/reverse button for one-handed operation
External oil port for easy maintenance
Externally accessible brushes for extended tool life

2 Ea. Ni-MH Battery 1834 (193159-1)
Charger DC1801
Battery cover (414938-7)
Hex wrench 3 (783201-2)
Hex wrench 4 (783202-0)
Hex wrench 5 (783203-8)
Hex wrench 6 (783204-6)
Hex wrench 17-19 (783212-1)
Oil (SC00000106)
Cutter blade Set (SC00000580)
Plastic tool case (SC08100920)
Cutting capacity
1/8" - 3/4"

Cutting speed
6 sec.

Watt Hours
46.8

Battery (Ah)
2.6

Length
16-3/8"

Net Weight (lbs. w/battery)
23.1

Shipping Weight (lbs.)
35.8

UPC Code
088381035606

SC190DWDE Makita Parts

Festool RS 2 E Orbital 1/2 Sheet Sander 567669

Festool 567669, Light surface 1/2 Sheet sander

The large 4 1/2" x 9" (115 x 228 mm) sanding surface and a 3/32" (2.5 mm) sanding stroke makes the RS 2 the perfect choice for fine sanding large surfaces. Typical applications include intermediate sanding of varnished doors, leveling large surfaces, and fine sanding of delicate stock. An additional ergonomic hand grip enhances controllability and reduces fatigue during long sessions. This sander is especially good for applications that require an absolutely even surface (like tabletops).

Variable SpeedStep-less speed control allows you to adjust to the needs of the application

Vibration-StopBalanced design delivers better finish results, smooth operation and greater comfort

Dust ExtractionIntegrated dust extraction system can be used with Turbo dust bag set or with CT dust extractors.
Orbital Sanding MotionFull pad contact with controlled and fine orbital sanding motion to minimize swirl marks and produce smoother surfaces.
Large Rectangular PadWith a 4 1/2" x 9" pad, the RS 2 handles large surfaces quickly and evenly.

Works With Sheet AbrasivesAbrasive clamping lever allows for the use of non-StickFix and 1/2 sheet abrasives.

StickFix Sanding Pad Hook & Loop DesignFast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing, leading to longer abrasive and pad

567669 Festool Parts-Accessories

DeWalt 21 lb SDS Max Demolition Hammer - D25899K

Dewalt D25899K, 21 lb SDS Max Demolition Hammer

Features:
14.0 Amp motor provides high performance and overload protection
Non-air pumping beatpiece eliminates masonry dust from entering the unit extending tool and seal life
Spring-loaded dust seals ensure longer tool life
Large on/off rocker switch allows for easy single finger operation
One-step chisel rotation (12 positions) allows the user to quickly and accurately adjust the chisel, not the tool
Large rear rubber handle allows easy operation with 1 or 2 hands
Variable position side handle allows 360° rotation and 150° adjustment for ease of use
In-line design for easy operation of tool in horizontal or vertical applications
SDS max tool holder with rubber dampers absorbs energy providing longer life
Warranty Information
Impact Energy
18.5 ft-lbs
Amps
14 Amps
Max Watts Out
750 W
Loaded Speed (bpm)
2,040 bpm
Variable Impact Control Dial
19 Settings
Chisel Rotation
One-step, 12 Positions
Tool Length
25.8 "
Tool Weight
21.2 lbs
Includes:
360° adjustable side handle
Kit Box

D25899K Dewalt Parts

DeWalt 1/2" VSR Pistol Grip Hammerdrill Kit - DWD520K

Dewalt DWD520K, 1/2" VSR Pistol Grip Hammerdrill Kit

Features:
10.0 Amp motor delivers increased drilling performance
Patented DEWALT built motor design generates 50% more power with increased overload protection for added durability
Dual Mode: hammerdrill / drill for versatility in masonry, wood, or steel drilling applications
2-Speed range for high speed drilling or high torque applications
Soft grip handle and two-finger trigger for increased comfort and greater control
Metal gear housing for jobsite durability and increased reliability
360° locking side handle with soft grip for greater control and versatility
Warranty Information
Amps
10.0 Amps
Max Watts Out
980 W
No Load Speed
0-1,200 / 0-3,500 rpm
Blows/Min
0-56,000 bpm
Capacity In Steel
1/2 "
Capacity In Wood
1-1/2 "
Concrete Optimum
5/32 - 7/16 "
Kit Box
Yes
Tool Length
14 "
Tool Weight
6.0 lbs
Includes:
360° locking side handle
Steel depth rod
Chuck key with holder
Kit Box

Bosch Colt™ Variable-speed Palm Router Kit PR20EVNSK

Bosch PR20EVSNK

Colt™ Variable-speed Palm Router Kit

Features
1.0 HP (Max. Tool Output) — 5.6 Amp Motor -35,000 RPM
Rugged Aluminum Fixed Base — Durable, solid and precise
Fast & Precise Depth Adjustment System — The best depth adjustment system in its class
Unique Finger Support Pockets — For additional stability, especially when trimming edges
Enhanced Bit Capacity — Fixed Base accepts bits up to 1-5/16" in diameter
Softstart — Reduces start-up torque
Constant Response™ Circuitry — Monitors and maintains speed under load for consistent performance and provides overload protection
Versatile Bit-Changing System - Fast, easy bit changes using two wrenches or spindle lock and one wrench.
Quick-Clamp System — Allows motor to be easily adjusted or moved from base to base
Offset Base with Spindle Lock — Allows routing near vertical surfaces, such as when trimming laminate applied to top of countertop backsplash
Angled cord exit — Helps keep cord out of the way
Tilt Base with Detents at Key Angles — Allows routing at special angles and in hard-to-reach areas
Underscribe Attachment — Mounts to fixed base for creating precise seams between sheets of laminates
Straight Edge Guide — Guides router along edges of workpiece or up to 3-5/8" from edge
Roller Guide — Guides router when non-bearing bit or unpiloted bit is used
Tool Specifications
Amperage: 5.6
Assembled In: Malaysia
Collet Capacity: 1/4" Self-releasing
Height: 7.5"
Max. Motor HP: 1 HP
No Load RPM: 16,000 - 35,000
Weight (lbs.): 3.3
Includes
(1) -- PR20EVS Motor
(1) - 1/4" Self-Releasing Collet Chuck - 2609160084
(1) - 17 mm Collet Wrench - 2609110438
(1) - 10 mm Shaft Wrench - 2609110786
(1) - Fixed Base -- PR001
(1) -- Straight Edge Guide -- PR002
(1) -- Roller Guide -- PR003
(1) -- Offset Base with Roller Guide -- PR004
(1) -- Tilt Base -- PR005
(1) -- Underscribe Plate with Wrenches -- PR006
(1) - Carrying Case
Works With
Accessories

Carbide Tipped Double Flute Straight BitsView Category Detail

Carbide Tipped Hinge Mortising BitsView Category Detail

Carbide Tipped Triple Flute Laminate Flush Trimming BitView Category Detail

Carbide Tipped Roundover Bowl BitsView Category Detail
Attachments

Offset Base with Roller Guide for Palm RouterModel Number: PR004View Product Detail

Tilt Base for Palm RouterModel Number: PR005
Use to rout special angles and rout in hard-to-reach placesView Product Detail

Underscribe Plate with Wrenches for Palm RouterModel Number: PR006View Product Detail

Side-Handle Subbase with Dust Extraction PortModel Number: PR007
Side handle provides additional gripping location for support of router
Includes vacuum hose port and dust extraction hood for use when edge-formingView Product Detail

Base Cover for Palm RouterModel Number: PR008
Provides extra insulation from heat in heavy-use situationsView Product Detail

Palm Router Subbase for use with Threaded Templet GuidesModel Number: PR010
Precision Centering Design makes it easy to follow intended cut line when using jigs, templets and other fixturesView Product Detail

Roller Guide for Palm RouterModel Number: PR003View Product Detail

Palm Router Subbase for use with Bosch RA-Series Templet GuidesModel Number: PR009
Precision Centering Design allows accurate positioning of bit within subbase and templet guidesView Product Detail
Tools

Roller Guide for Palm RouterModel Number: PR003View Product Detail

Offset Base with Roller Guide for Palm RouterModel Number: PR004View Product Detail

Tilt Base for Palm RouterModel Number: PR005
Use to rout special angles and rout in hard-to-reach placesView Product Detail

Underscribe Plate with Wrenches for Palm RouterModel Number: PR006View Product Detail

Side-Handle Subbase with Dust Extraction PortModel Number: PR007
Side handle provides additional gripping location for support of router
Includes vacuum hose port and dust extraction hood for use when edge-formingView Product Detail

Base Cover for Palm RouterModel Number: PR008
Provides extra insulation from heat in heavy-use situationsView Product Detail

Palm Router Subbase for use with Bosch RA-Series Templet GuidesModel Number: PR009
Precision Centering Design allows accurate positioning of bit within subbase and templet guidesView Product Detail

Palm Router Subbase for use with Threaded Templet GuidesModel Number: PR010
Precision Centering Design makes it easy to follow intended cut line when using jigs, templets and other fixturesView Product Detail

10 mm Router Shaft WrenchModel Number: 2609110786View Product Detail

17 mm Collet WrenchModel Number: 2609110438View Product Detail


PR20EVSNK Bosch Parts
Downloads
Owner's Manual Parts Diagram

Makita 7" 15 AMP Angle Grinder Soft Start Technology GA7040S

7" 15 AMP Angle Grinder Soft Start Technology
Model: Makita GA7040S

Soft Start Technology allows for smooth start-ups and minimizes kick backs.
Rotatable rear handle can be positioned to suit most cutting operations.
Labyrinth construction seals the motor from dust and debris by creating a complex set of channels prohibiting contamination.
Protective Zig-Zag anti-dust varnish seals the motor from debris by forming an impenetrable barrier under rotation for longer life.

Low Vibration rear handle with soft grip for more comfort and control.
Great for Welders, Stone finishers, Masons, Fabricators, etc

:
7" Grinding Wheel 741413-3
Side Handle 152539-0
Toolless Wheel Guard 122767-1
Wheel Guard 154676-6
Inner Flange 224317-9
Lock Nut 193465-4
Lock Nut Wrench 782412-6
Grinding Wheel
7"

Wire Cup Brush
6"

Sanding Disc
7"

No Load RPM
8,000

AMPS
15.0

Spindle Thread (11 UNC)
5/8"

Length
20-1/8"

Net Weight (lbs.)
12.4

GA7040S Makita Parts

Milwaukee 1/2 in. VSR Impact Wrench with Detent Pin Socket Retention 9072-20

Milwaukee 9072-20, Impact Wrench 7A 1/2 SQ DRV DI

This model features a QUIK-LOK® cord, pin-detent system to securely retain sockets or adapters, and a variable speed reversing switch for added control in drilling applications or driving lag-bolts. Delivering 300 ft. lbs. of torque and weighing only 6 pounds, this tool has a great power to weight ratio. The powerful 7.0 amp motor drives a unique impact mechanism at 1800 RPM (no load). The ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel to the tool. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time.

1/2 in. VSR Impact Wrench with Detent Pin Socket Retention Milwaukee 9072-20

Features
10 ft. QUIK-LOK® 2-wire cord
300 ft. lbs. of torque - more torque saves time
AC-only variable speed reversing switch with speed setting dial
Powerful 7.0 amp motor, 600-1800 RPM and 1000-2600 IPM (no load)
Light weight (6 lbs.) with balanced feel and cushioned grip
Pin detent system to securely retain sockets and adapters
Specifications
Voltage
120 AC Only
Drive Size
1/2 in. Square
Torque
100-300 ft.-lbs.
No Load Speed
600-1,800 RPM
Amps
7.0
No Load BPM
1,000-2,600
Cord Type
10 ft. QUIK-LOK®
Switch Type
Trigger
Soft Grip Handle
Yes
Socket Retention
Flat End Detent Pin
Length
11-5/8 in.
Tool Weight
6.0 lbs.
Shipping Weight
7.6 lbs.

9072-20 Milwaukee Parts

Makita BTD144 Impact Driver

NEW!!! Makita TD144 Impact Driver

Variable 3-speed power selection switch (0-1,300/0-2,000/0-2,600 RPM and 0-1,300/0-2,800/0-3,400 IPM) provides the user with precise fastening control for a wide range of applications.
Makita-built Brushless Motor Technology delivers increased motor efficiency to provide up to 20% longer battery life per charge.
Makita-built Brushless Motor delivers 1,420 in.lbs. of Max Torque.
Compact design at only 5-1/2" long and weighs just 3.3 lbs. for reduced operator fatigue.

Makita's proprietary hammer and anvil impact mechanism are manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power.
Battery warning light and built-in L.E.D. light both flash when it is time to recharge the battery.
Convenient one-touch 1/4" hex chuck for simple bit insertion.
Built-in L.E.D. light with an independent on/off switch illuminates the work area.
Ergonomic shape fits like a glove with even pressure and easy control.
Electric brake for increased productivity.
LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 2.5x more cycles.
30-Minute Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature.
30-Minute Rapid Optimum Charger has a built-in fan to cool the battery to produce more lifetime work.
LXT Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power).
The charger earned the ENERGY STAR® label for meeting the strict energy-efficient guidelines set by the US Environmental Protection Agency (EPA) and US Department of Energy (DOE).
3-year warranty on tool and 1-year warranty on battery and charger.

INCLUDES:
2 LXT Lithium-Ion Batteries (BL1830)
1 30-Minute Rapid Optimum Charger (DC18RA)
Plastic Tool Case (824774-7)
Tool Belt Clip (324705-1)
ALSO AVAILABLE:
BTD144Z (tool only)
Capacity
Hex Shank
1/4
No Load RPM

0-1,300 / 0-2,000 / 0-2,600 RPM
Impacts/Min.(IPM)

0-1,300 / 0-2,800 / 0-3,400 IPM
Torque (in.-lbs.)

1,420
Watt Hours

54.0
Battery (Ah)

3.0 (Li-Ion)
Length

5-1/2"
Net Weight (lbs. w/battery)

3.3
Shipping Weight

10.3 lbs.
UPC Code

088381-099479

BTD144 Parts

Festool LEX 2 150/3 Air Sander 691126

Festool LEX 2 150/3 Air Sander Festool 691126

Features

Ergonomics

Formed to fit your hand with rubberized top grip cap and unobtrusive dead-man switch

Vibration-StopBalanced design delivers better finish results, smooth operation and greater comfort

StickFix Hook & Loop Design

Fast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing, leading to longer abrasive and pad

Pad Brake

Stops the pad quickly, so you can worry less about damaging your freshly finished workpiece when setting your tool down

9/32" Stroke
The LEX 2 150/3 is distinguished by its stroke length which is designed for superfine sanding.

IAS 2 Connection

3-in-1 hose design; supplies air, extracts dust, and provides an exhaust all through one hose

691126 Festool Parts

DeWalt 13.0 Amp Reciprocating Saw Kit - DW311K

13.0 Amp Reciprocating Saw Kit - Dewalt DW311K
Features:
13 Amp motor delivers increased power for heavy-duty applications
Orbital action delivers fast cutting for wood applications
0-2,700 SPM and 1-1/8" stroke length for fast and efficient cutting
Keyless stainless steel blade clamp for quick and easy blade changes and increased reliability
Keyless adjustable shoe easily adjusts depth of cut and extends blade life
Variable speed control dial matches the correct speed for the application for increased versatility and control
Anti-slip comfort grip provides increased comfort and control
Warranty Information
Amps
13 Amps
Strokes/Min
0-2,700 spm
Stroke Length
1-1/8 "
Keyless Blade Clamp
Twist
4 Position Blade Clamp
No
Adjustable Shoe
Yes
Variable-Speed Trigger
Yes
Variable-Speed Dial
Yes
Orbital Action
Yes
Anti-Slip Comfort Grip
Yes
Tool Length
18.0 "
Tool Weight
9.0 lbs
Includes:
Carry case
Instruction Manual

DW311K Dewalt Parts

Bosch 36V 1" SDS-Plus® Rotary Hammer 11536VSR

36V 1" SDS-Plus® Rotary Bosch Hammer 11536VSR
Features
Drills faster than key competitors, both corded and cordless!
50% Faster Drilling - 7.1 in/minute!
Bulldog™ Power Unleashed!
Tool Specifications
Impact Energy (ft. lbs.): 2.2
Length: 15"
Max. Capacity in Concrete: 1"
Max. Capacity in Metal: 1/2"
Max. Capacity in Wood: 1-1/4"
No Load BPM: 0-4,260
No Load RPM: 0-960
Rating: 36 Volt
Weight (lbs.): 9.6
Includes
(1) - 360° Auxiliary Side Handle
(1) - Carrying Case
(1) - 1-Hour Charger
(1) - Depth Gauge
(2) -- Litheon™ Batteries

11536VSR Bosch Parts

Jet JWBS-16B, 16" Bandsaw

Stock Number: Jet 708749B
The one-of-a-kind JWBS-16B 16" Bandsaw with TSC has a triangular design that provides superior column rigidity. The triangular column keeps the bandsaw from flexing as it tackles tough applications. The JWBS-16B is packed with features such as the European style adjustable carbide blade guides, 8-spoke computer balanced band wheels, dual locking cabinet doors, blade tracking adjustment window, and micro-adjustable lower blade guide

Triangular design provides superior column rigidity
10" resaw capacity for cutting large pieces of wood, slicing veneers, cutting book matched panels
17" x 17" cast iron table supports your work material
Adjustable rear support for wider footprint and more stability
Precision computer balanced wheels eliminate vibration for accurate blade tracking
Micro-adjustable lower blade guide reduces friction for longer blade life
European style adjustable carbide blade guides
8-spoke band wheels computer balanced to spin true without vibration
Rigid, heavy-duty guide post with rack and pinion adjustment for extra blade support
All cast iron handwheels make smooth, easy blade adjustments with less effort
3/8", 6 TPI woodworking blade is included so you can start cutting right away
4" dust port allows for direct connection of dust collection system
Direct-reading scale lets you select blade tension for widths up to 1-1/4"
Dual locking cabinet doors allow access to blade when necessary
Single knob tracking adjustment simplifies the blade tracking process
Blade tracking adjustmewnt window lets you view your blade position on the wheel tire
Model Number
JWBS-16B
Brand
Jet
Overall Dimensions
71 x 22 x 30-3/4
Height
71 inch
Width
22 inch
Length
30.75 inch
Net Weight
310 pound
Cutting Capacity Width
16 3/8 "
Cutting Capacity Height
12 "
Minimum Saw Blade Width
1/8 "
Maximum Saw Blade Width
1¼ "
Blade Speed
3000 SFPM
Blade Length
123 "
Table Dimension (LxW)
17 x 17 "
Table Tilt
10 ° left, 45 ° right
Table Height From Floor
35¼ "
Dust Port Outer Diameter
4 "
Dust Collection Minimum CFM
400 cu.ft/min
Stand Type
Closed
Bandsaw Size
16 "
Wheel Diameter
16½ "
Motor Power
1½ HP
Motor Voltage
115 / 230 V
Prewired Voltage
115 V
Motor Current
11.5 / 5.8 A
Motor Phase
1 Ph
WARRANTY AND SERVICE 708749
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
-->
708119
JMB-UMB-HD Universal Mobile Base

Milwaukee 2-1/4 Max HP EVS BodyGrip® Router 5616-20

The Milwaukee Advantage

2-1/4 Max HP EVS BodyGrip® Router Milwaukee 5616-20
Fully-loaded with an award-winning feature set, Milwaukee's new 2-1/4 max hp electronic variable speed BodyGrip® Router offers the ultimate in router performance. Featuring an industry-first BodyGrip® design, a comfortable rubber grip wrapped around the router's base with an adjustable, custom-fit handstrap, and two over-molded side handles, comfort is in the palm of your hands. In addition, the router's wide, 6 in. base diameter and low center of gravity design provide a comfortable, well-balanced ride throughout the cut. Whether left or right-handed, the router's design minimizes muscle fatigue while maximizing cut control and comfort during operation. The new router is powered by a best-in-class, 13 amp, 2-1/4 max hp Milwaukee motor with electronic variable speed (10,000-24,000 rpm), premium motor feedback and soft-start technology. With 36 distinct speed settings, the user can precisely match the tool speed to the routing task at hand. The router's premium electronic motor feedback circuitry maintains optimal cutting speed and power throughout a cut, regardless of load conditions. Finally, the router features motor soft-start technology that quickly, steadily ramps the motor up in stages, thus reducing tool jerking and wear on the brushes and bearings. Precise routing ensures one-pass quality profiles. To this end, Milwaukee's new 5616-20 router features Milwaukee's industry-first linear depth adjustment system with above-the-table access. The ideal solution for both free-hand and table-mounted routing, this industry-exclusive system provides fast, accurate coarse adjustments to within 1/8 in. and micro-fine adjustments to within 1/64 in. Unlike helical systems, the motor doesn't spin as the cut depth is changed, ensuring that the motor controls and power cord remain in a constant, optimal position. This revolutionary system can be accessed from above a router table with the included T-handle wrench or any 3/8 in. hex socket wrench with extension and simplifies the once tedious adjustment process required with other models. In addition, the new 2-1/4 max hp EVS BodyGrip® routers are built to last in the Milwaukee tradition. The router's circuit board is completely submerged in a protective, flexible compound that protects it from drop-shocks, vibration and damaging contamination. For added protection when table-mounted, the router also features an exclusive motor contamination shield that keeps damaging debris out without sacrificing airflow and a durable, rubber shield for dust-free access to the height adjustment system. Rounding out the defense is a heavy-duty, 22 amp switch, 100% sealed ball bearing motor construction, and a tough machined aluminum motor housing and base.
Features
Exclusive BodyGrip® design
Powerful 13 amp, 2-1/4 max hp Milwaukee motor
Premium electronic motor feedback maintains speed and power under load
Electronic variable speed with soft start (10,000-24,000 rpm)
Micro-fine linear depth adjustment to within 1/64 in.
Exclusive above-the-table depth adjustment system
Exclusive motor contamination shield minimizes damage, maximizes airflow
Specifications
Voltage
120 AC
Max HP
2.2
No Load Speed
10,000-24,000 RPM
Collet Dia
1/4 in.-1/2 in.
Amps
13.0
Cord Type
8 ft. Fixed
Construction Type
Double Insulated
Switch Type
Rocker
Dial Speed Control
Yes
Handle Style
BodyGrip
Electronic Feedback
Yes
Depth Adj Range
1-21/32 in.
Sub Base Dia
6 in.
Height
8-1/2 in.
Tool Weight
8.8 lbs.
Shipping Weight
11.2 lbs.
Includes
Two 1-1/8 in. Collet Wrenches
1/2 in. Collet
1/4 in. Collet
T-Handle Wrench

5616-20 Milwaukee Parts