Bosch 2.25 HP Electronic Plunge Router 1613AEVS

Bosch 2.25 HP Electronic Plunge Router 1613AEVS

Features:
Trigger switch with lock-on button
Variable Speed Dial — For matching speed to workpiece and task - 11,000-22,000 RPM
Soft-start — Reduces start-up torque
Constant Response™ Circuitry — Maintains constant speed under load, provides overload protection
Precision Center Design — Makes it easy to keep bit on intended cut line when using jigs, templets, dovetail fixtures and similar guidance devices
Tool-free templet guide adapter — For fast and easy templet guide changes
Wide Opening in Base and Subbase — Allow use of wider bits and provides better visibility
One-piece armature shaft — For accuracy and long bit shank capacity
Smooth Plunge Action and Springed Plunge Lock Lever

Includes
Tool-Free Templet Guide Adapter -- 2 610 991 370
Dust Extraction Hood -- 2 608 190 038
Chip Shield -- 2 610 912 599
Vacuum Hose Adapter -- VAC002
1/4" S. R. Collet Chuck -- 2 610 906 283
24mm Collet Nut Wrench -- 2 610 992 417
1/2" S. R. Collet Chuck -- 2 610 906 284

Choosing the right router

Bosch Parts

PONY Cabinet Claw™ #8500

Stock number 8510 is a unique tool that functions with multiple steps for face frame cabinet installations, all in one step. The clamps never need to be removed from your job until the installation is complete. Using these clamps; stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position; no removal or repositioning of the clamp is necessary. Professional quality installation is achieved at a fraction of the time compared to more conventional clamps. Comes with protective felt pads. Mount stiles from 1-1/2" to 2" width and up to 1-1/2" thickness each with 4" opening capacity.
Features:
light weight, yet strong aluminum claws and alignment plates
protective felt pads to protect against marring
1/2" diameter zinc-plated, cold-drawn steel screws with special, smoothly cut Acme threads
plastic grooved handles for a strong grip
1/8" standard drill bit

Festool OF1400 Router 574267

Our most versatile router The Festool OF 1400 Router provides 1400 watts of power in a machine that weighs less than 10 lbs. It accepts 1/2", 1/4" or 8 mm bits. With enough power to handle most routing tasks and small enough to be extremely maneuverable, the OF 1400 is the one router every tradesperson should own. With a category-leading 2 3/4" plunge depth, precise to 1/256" (1/10 mm), this router gives you the power, precision, depth of cut, and dust extraction capabilities that will simplify your routing tasks.

PowerWith 1400 watts and MMC electronic controls, the OF 1400 is a mid-sized router with enough power to tackle even your largest projects

2-3/4" Plunge DepthEnhanced depth is especially useful when routing on top of a template

MMC ElectronicsElectronic controls provide constant speed under load for improved cut quality, step-less variable speed for different applications, and overload protection for longer

Swiveling Chip DeflectorIncluded chip deflector can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners

Jet JJP-12HH 12" Planer /Jointer with Helical Head 708476

The innovative JET JJP-12HH Helical Head 12" Jointer/Planer takes our award-winning jointer/planer combination machine and makes it an ever better investment. With the addition of our quality helical cutterhead with indexable carbide inserts, the all-new JJP-12HH sets the standard for creating superior stock in your own workshop.
Details
Helical cutterhead with indexable carbide inserts for a superior finish and quieter cut
Parallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustments
Extra large aluminum extruded fence with centered controls for quick adjustments
Extremely quick changeover between jointing and planing functions. Fence does not need to be removed
Powerful 3HP induction motor easily handles the toughest jointing and planing tasks
Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability
Built-in dust chute with 4" dust port used for both jointing and planing operations
Large handwheel for quick and precise adjustments of planer table
Heavy-duty cast iron tables with a machined finish to ensure accuracy and flatness
Magnetic switch provides safer and more reliable operation

Jet Parts

Makita MAC700 Air Compressor - 2.0 HP

Makita MAC700 Air Compressor - 2.0 HP

High Output - Cast Iron Pump with Big Bore cylinder and piston, combined with greater bore and stroke, delivers maximum performance. Low Noise - Substantially lower noise levels with a large 1,720 - RPM pump-enabling greater displacement at lower RPM.
Low Amp Draw - Reduces incidences of tripped breakers and voltage drop that can cause premature motor failure.
Oil Lubricated - Cooler running pump, minimizes wear

Roll-bar Handle - For portability. Large automotive style industrial air filter for increased air intake and greater efficiency
Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
Oil sight glass for fast, easy and efficient maintenance.
Lever handle ball valve - tank drain valve improves upon standard petcock design for easier maintenance
Built-in thermal overload for additional motor protection

Makita Parts

Festool Rotex RO150 FEQ

Festool Rotex RO150 FEQ 571594

Refined power
Never before has such a powerful sander been so refined. The Rotex RO 150 changes effortlessly from coarse sanding, to fine sanding, to polishing. Changing sanding pads is simple, and requires no extra tools. 720 Watts of power means the RO 150 can take on any job. Yet its 5 lb. frame, minimal vibration and superior ergonomic design make it so easy to work with. The gear box is completely enclosed and impervious to dust, making the RO 150 extremely reliable, even in the most demanding environments

Features:

Dual-Mode Sanding
Operate in gear-driven, aggressive mode for rapid stock removal, or switch to random orbital mode for fine sanding

Enclosed Gear UnitPrevents dust from entering the gear and bearing unit, vastly extending the service life of the tool.
Power & SizeWith 720 watts and dual-mode capability, the 6" RO 150 is your full-size option for the toughest tasks.
Includes
Abrasive sample pack

Auxiliary side handle

Edge protector

Plug-it power cord

Removable dust channel

StickFix sanding pad
6"
Systainer
SYS 3
Specifications
Dust extraction port
Pad diameter
6"
Power consumption
720 watts / 6 amps 120 v AC
Sanding stroke
3/16"
Speed eccentric motion
3300 - 6800 opm
Speed rotary motion
320 - 660 rpm
Weight
5 lbs.

DeWalt Heavy-Duty 8-1/2" Single-Bevel Sliding Compound Miter Saw - DW712

DeWalt DW712 Heavy-Duty 8-1/2" Single-Bevel Sliding Compound Miter Saw

Features:
Powerful 15.0 Amp motor and 5,400 rpm deliver extended power and durability
Adjustable stainless steel detent plate with 11 positive stops deliver repeatable accuracy and worksite durability
Cuts 3-1/2" crown nested vertically for increased vertical cutting capacity
Cuts 3-1/4" base vertically for increased vertical cutting capacity
Left miter capacity 50 and Right capacity 60 provides great versatility in miter cutting
Easy to use bevel stops at 0, -2, 33.9, 45, 48
Miter cam lock system provides increased comfort
Horizontal main handle provides increased comfort during use
Tall sliding fence provides increased cutting capacity

Specifications
Amps
15 Amps
No Load Speed
5,400 rpm
Blade Diameter
8-1/2 "
Arbor Size
5/8 "
Vertical Capacity: Baseboard Against Fence
3-1/4 "
Vertical Capacity: Crown Molding Vertically Nested
3-1/2 "
Horizontal Capacity: Baseboard Lying Flat
11.8 "
Horizontal Capacity: Crown Molding Lying Flat
11.8 "
45° Bevel Cut Capacity (dimensional lumber)
2x12
90° Cross-Cut Capacity (dimensional lumber)
2x12 "
90° Cross-Cut Capacity (Max Width)
2" x 11.8"
45° Miter Cut Capacity (Max Height)
2.9"
45° Miter Cut Capacity (Max Width)
8.3"
Tool Weight
43 lbs
Shipping Weight
52 lbs
Includes:
carbide blade
blade wrench

Dewalt DW712 Parts

Facts about Miter Saws

DW712 Dewalt Parts and Breakdown Type 2

DW712 Dewalt Parts and Breakdown Type 1

Bosch Litheon 18V Combo Kit CLLPK40-18

Bosch Litheon 18V Combo Kit CLPK40-180

Includes:
(1) -- 18V Litheon Brute Tough™ Hammer Drill Driver - 17618
(1) -- 18V Litheon™ Recip Saw - CRS180
(1) -- 18V Litheon™ Circular Saw - CCS180
(1) -- 18V Litheon™ Flashlight - CFL180
(2) -- 18V Litheon™ FatPack Batteries - BAT618
(1) -- 30-minute Litheon™ Battery Charger - BC630
(1) -- 6" Demolition Recip Blade
(1) -- 12" Demolition Recip Blade
(1) -- 6 1/2" Carbide Circ Saw Blade
(1) -- Magnetic Bit Holder
(2) -- Phillips Drive Bit
(1) -- Auxiliary Handle
Carrying Case

Bosch Parts

“This dado set cuts incredibly clean with absolutely no tearout or ragged edges”- Lonnie Bird

INDUSTRIAL QUALITY HIGH PERFORMANCE DADO SET A stacking dado set is an ideal tool for cutting dadoes and grooves as well as tenons for strong mortise-and-tenon joinery. Amana Tool’s® Prestige™ dado sets the standard for smooth, flat-bottom cuts both with and across the grain. This super fine dado set cuts super smooth, perfect flat-bottom grooves that are free of splinters or rough edges.
Like all of the blades in Amana’s Prestige™ lineup, the new super-smooth cutting Prestige™ dado set features the latest in cutting tool technology including massive steel tool-steel plates and precision ground D-10 carbide teeth. The 8” diameter, 24-tooth outside blades feature ATB grind geometry with every sixth tooth flat ground for efficient chip removal. Each tooth body also features anti-kickback design to help prevent overfeeding.
Each of the six interior chippers features four teeth and the standard width capacity is 1/4” through 29/32”. Adjustments can be easily made in 1/32” increments and even finer adjustments, as small as .002”, can be made by using the supplied shim set.This dado set accommodates today's undersized plywoods.

Jet 31" Parallel Clamp #70431

Exclusive design (patent pending) provides precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure
Precision-Rule™ measurement system (patent pending) provides a consistent setup and quick identification of opening cap
Slide-Glide trigger (patent pending) makes precise adjustments rapidly and easily
Ergonomic SUMOGRIP® handle integrated with soft grip for added comfort and increased torque
Moveable rail stand/end stop helps preset clamping capacity rapidly and accurately
Non-marring composite resin jaw faces glue resistant in design, ensure even clamping pressure
Reversible clamping movable jaw can be reversed to be used as a spreader
Side profile allows narrow clamping on the side of the jaw face
Acme threaded handle turns easily and applies continuous pressure

Part Number=70431
Trademark=Precision-Rule™ SUMOGRIP® Cross Doc™
Spread Capacity=38 "
Opening Capacity Max.=31 "
Nom. Clamp Pressure=1000 Lbs
Throat Depth=4 1/8 "
Web Description=31" Parallel Clamp
Overall Dimensions=1.81"HX6"WX40"L
Net Weight=7.15 pound

Makita 18V LXT Lithium-Ion Cordless 3-Speed Brushless Motor Impact Driver BTD144

Makita 18V LXT Lithium-Ion Cordless 3-Speed Brushless Motor Impact Driver BTD144

Variable 3-speed power selection switch (0-1,300/0-2,000/0-2,600 RPM and 0-1,300/0-2,800/0-3,400 IPM) provides the user with precise fastening control for a wide range of applications.
Makita-built Brushless Motor Technology delivers increased motor efficiency to provide up to 20% longer battery life per charge.
Makita-built Brushless Motor delivers 1,420 in.lbs. of Max Torque.
Compact design at only 5-1/2" long and weighs just 3.3 lbs. for reduced operator fatigue.

Makita's proprietary hammer and anvil impact mechanism are manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power.
Battery warning light and built-in L.E.D. light both flash when it is time to recharge the battery.
Convenient one-touch 1/4" hex chuck for simple bit insertion.
Built-in L.E.D. light with an independent on/off switch illuminates the work area.
Ergonomic shape fits like a glove with even pressure and easy control.
Electric brake for increased productivity.
LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 2.5x more cycles.
30-Minute Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature.
30-Minute Rapid Optimum Charger has a built-in fan to cool the battery to produce more lifetime work.
LXT Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power).
The charger earned the ENERGY STAR® label for meeting the strict energy-efficient guidelines set by the US Environmental Protection Agency (EPA) and US Department of Energy (DOE).
3-year warranty on tool and 1-year warranty on battery and charger.

Makita Parts

Steel City 1HP Dust Collector #65110

1 HP Dust Collector
Washable, 1 Micron Filter Bag:As an added value, a 1 micron bag is supplied standard equipment, which gives you superior filtration.
1 HP TEFC Induction Motor: Totally enclosed, fan cooled, permanently lubricated motor, provides high performance for long lasting use and dependability.
Keyed Type Safety Switch :Keyed switch is removable for additional safety and to prevent unauthorized use.
Precision Spin-Balanced Impeller:The steel impeller is balanced and curved for optimum air velocity, noise reduction and protection to minimize wear.
Built-in Casters:Heavy duty construction base, mounted on four swivel casters provides excellent maneuverability and total portability from machine to machine.
Standard Equipment:
Includes a 1 HP, 115V, single phase TEFC induction motor; 1 micron upper bag, lower plastic replacement bags, 4" x 6' collection hose, 1 intake port cap, 2 bag clamps, four swivel caster assemblies, cord, plug, and user manual with parts breakdown.

Dimensions:H: 73" W: 15" L: 28"
Weight (Shipping): 84 lbs.
Weight (Net): 79 lbs.
Phase: Single-Phase
Warranty: 5 Years
Detailed Specifications
Motor:1HP, 115V, 60 Hz TEFC
Motor Control:Pull Out Keyed Toggle Switch
Max. CFM:700 CFM
Static Pressure:8.5 (inches of water)
Bag Filtration:1 micron
Chip Capacity:2.5 Cu. Ft.
Impeller:Steel
Blow Wheel Diameter:9"
Number of Intakes:1
Hose Diameter:4"
Decibel Reading:87 dB
Footprint Dimensions:15 1/2" x 28"

Festool MFK 700 Modular Trim Router- #574288

Festool MFK 700 Modular Trim Router- 574288
Precision and flexibility in a trim router
With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps. Trim laminate and edge band or rout grooves for inlays easily with the lightweight and maneuverable MFK 700. Packed with features, this trim router saves you money by allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1/256" (1/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal router for all of your light routing tasks.
One Wrench ColletThe MFK 700 Router features a one-wrench collet. A button locks the spindle in place allowing the collet to be loosened and tightened quickly with a single tool. No more busted knuckles! The MFK 700 includes a 1/4" collet. Optional 8mm collet also available.
Dust Extraction PortOne of the fundamental design principles for any Festool power tool is dust extraction and once you have experienced working in a dust free environment you will quickly learn the benefits which include a healthy work space, the ability to see the workpiece better and less clean up time. The MFK 700 includes offers a variety of dust extraction options for every possible application
720 Watt MotorThe MFK 700 Router is equipped with a powerful 720 Watt motor. That's just shy of one horsepower! With that much power, you can easily tackle most trimming, profiling and routing applications. The motor utilizes onboard thermal monitoring to protect against overload and soft start technology ensuring long service life.

Hitachi CN16SA 16 Gauge Sheet Metal Nibbler

3.5 Amp motor, intense power that cuts through corrugated and flat sheet metal
3-position indexing die holder, for quick and easy direction changes
Smallest grip circumference in its class, for comfort and maximum control
Downward punching, minimizes chips on the work piece
One-touch, quick-off slide switch for enhanced safety
Impressive cutting speed, 5.7ft per minute of 16-gauge mild steel
Externally replaceable carbon brush, for quick and easy brush changes and extended tool life
3.5 lbs, portable and lightweight design facilitates maneuverability and ease of use
Includes:
Punch
Die
Hex Bar Wrench 2.5mm
Hex Bar Wrench 4mm

Hitachi Parts

Festool HL850 Planer

Unlimited rabbetingUsing an electric planer right up to the edge or on rabbets often produces unsatisfactory results, as the machine leaves a lip that has to be removed by hand—unless you have the Festool HL 850 planer. The HL 850 lets you cut flush to an adjacent surface because it can plane across the entire width of the rabbet. Because the planer head is mounted to one side, it sits flush with the opposite side of the planer housing. The retractable side guard makes planing safer, and it swings up and to the side as the rabbet depth increases. Planing up to the edge in deep rabbets is no longer a problem.

Near Total Chip Extraction
Efficient chip extraction with left or right side mounting. For best performance use with Festool CT 22 or CT 33 dust extractors and the 36mm hose.

Single Knife Cutter Head
Spiral, metal carbide, cutter head design with replaceable cutting knife for a smooth, “chatter-free” cut.

Buy It Here..

Porter Cable Finish Nailer / Brad Nailer Compressor Combo kit

The CF6221 includes 6 gallon, 150 PSI compressor, Porter Cable FN250C: 16 Ga. 2-1/2" Porter Cable Finish nailer BN138: 18 Ga. 1-3/8" Brad nailer, 25 feet of 1/4" air hose with coupler and plug, 500 finish nails of 2" length, 500 brad nails of 1-1/4" length, carrying bag

PORTER CABLE COMPRESSOR
Innovative shroud allows for better protection and portability
150 Max PSI allows users to drive more nails than a traditional 135 Max PSI compressor
6 gallon tank allows users to drive a large quantity of nails on a single tank charge
2.6 SCFM @ 90 PSI allows for quick compressor recovery time
34 lbs weight allows compressor to be easily carried
Maintenance-free pump for convenient operation
120 volt electric unit allows user to run the compressor on standard household current
10 Amps current draw allows users to use compressor with a 16 gauge or heavier extension cord (50 feet or less)
NAILERS
FN250C uses standard 16 Ga. finish nails from 1" to 2-1/2" long
BN138 uses standard 18 Ga. brad nails from 5/8" to 1-3/8" long
Maintenance-free motor designed to deliver long life
Internal piston catch for consistent max power on every shot
Tool-free depth-of-drive adjustment with detents for proper settings of nail heads
Tool-free jam release mechanism for easy nail removal

Porter Cable FN250C Parts and breakdown

Porter Cable BN138 Parts and breakdown

WoodHaven Router Plate 147

MAXIMIZE YOUR ROUTER'S POTENTIAL WITH ONE OF THESE ROUTER PLATES!-A router plate is one of the most useful items you can attach to your router. It provides greater stability when using your router freehand and it also lets you mount your router in a table. -The 147 is our most popular plate and is like having 4 plates in 1. Inserts snap in and outwithout tools-CNC Machined for accuracy.-Work flows smoothly over the plate.-Phenolic plates are machined from sheet stock for maximum flatness and strength.

Buy It Here..

Jet JWS-35X3-1 Shaper 3HP, 1Ph Stock # 708323

This new heavy-duty JET Shaper is available with a powerful 3HP, 1Ph motor with magnetic controls. The four-speed 4000, 6000, 8000, 10000 RPM step pulley drive with quick release lever allows you to select the best speed and torque for different cutter diameters.

Four-speeds 4000, 6000, 8000, 10000 RPM let you select the best speed and torque for different cutter diameters
Powerful 3HP, 1Ph motor with magnetic controls
Large 26-3/4” X 32-1/4” precision ground cast iron table provides a durable work area, predrilled for power feeder
Poly-V-belt transfers maximum power to the spindle
Starting Pins for irregular shaping
Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
Extra-large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments
Reversible spindle speeds for diverse shaping jobs
4" Dust port built into fence for convenient hookup to any dust collection system
Spindle lock for safe and easy cutter set-up
Spindle height scale

Makita BTD141 18V Lithium-Ion Cordless Impact Driver Kit with Rapid Automotive Charger

Kit includes Rapid Automotive Battery Charger that plugs into any standard 12V automobile power outlet.
Makita-built, 4-pole maximum torque motor delivers 1,330 in.lbs. of efficient torque in a compact size
50% more compact design at only 5-3/4" long and weighs only 3.3 lbs. for less operator fatigue
Ergonomic shape fits like a glove with even pressure and easy control

Built-in L.E.D. light for more illuminated work
Makita’s proprietary hammer and anvil are made using the highest quality steel and heat hardened to last longer
Electric brake for immediate stops and minimizes kickback
Two-piece armature and field along with externally accessible brushes for serviceability and longer motor life
LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5x more cycles
Makita Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) & 16 firm holding contact terminals (for constant high power)
60-Minute Rapid Automotive Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
60-Minute Rapid Automotive Charger has a built-in fan to cool the battery to produce more lifetime work
The charger earned the ENERGY STAR® label for meeting the strict energy-efficient guidelines set by the US Environmental Protection Agency (EPA) and US Department of Energy (DOE)
3-year warranty on tool and 1-year warranty on battery & charger

Makita BTD141 parts and breakdowns

FEIN Multimaster Top 2500

The new FEIN MULTIMASTER Generation
QuickIN rapid change system: Save time with the user-friendly lever for fast, tool-free accessory changes
SoftGrip insert: Optimum grip for safe, fatigue-free working.
Plastic case: The machine and the accessories are stored securely in a robust plastic case for optimum protection.
Even more accessories: A host of innovative accessories create a wider application spectrum for the FEIN MULTIMASTER.

Finding a Multi-Tool To Multiply Your Productivity

Jet JC-3BF, 3HP Cyclone with 5 Micron Bag Filter

Keep dust in the workshop under control and out of your lungs with the JC-3BF Cyclone dust collection system with 5-micron bag filter. This bad boy captures all the chips in its 55-gallon drum and separates out 99% of the dust, virtually eliminating the need for ambient air cleaners. The Cyclone’s top of the line 14-inch” impeller provides a hardy 1450 cfm of air flow, allowing for stellar performance even as the collection container fills. When full the collection bag’s ‘snap-in’ design makes waste disposal quick and easy. Plus, JET’s exclusive pressure tube lets you use a plastic collection bag in the drum without worrying that it will get sucked into the cyclone.

Part Number


708653K

Remote Control


n.a.

Sound Rating


80 dB

Bag Diameter


20 "

Filter Bag/Canister Length


81 "

Air Flow @ 4"


1,450 cu.ft/min

Static Pressure


12.12 inch of water

Particle Size (Micron)


99% @ 5-micron/35.5 sq ft

Air Inlet


8 "

Air outlet


8 "

Impeller Diameter


14 "

Impeller Fins


8

Impeller Material


steel

Separator Tank Diameter


19½ "

Separator Tank Height


17 3/8 "

Motor Power


3 HP

Motor Phase


1 Ph

Motor Voltage


230 V

Prewired Voltage


230 V

Motor Current


15 A

Family Description


JET® HIGH EFFICIENCY CYCLONIC DUST COLLECTION SYSTEMS

Model Number


JC-3BF

Brand


Jet

Overall Dimensions


67-3/4 x 45-3/8 x 111

Height


0 inch

Width


0 inch

Length


0 inch

Net Weight


257 pound

Makita JR3060 Recipro Saw (Variable Speed)

Tool-less blade change and shoe adjustment
Variable speed for precise cutting in a wide variety of materials
Powerful 12 AMP motor for continuous operation
Long 1-1/4" stroke for faster cutting

All ball and needle bearings for longer tool life
Externally accessible brushes for easy maintenance

INCLUDES:
1 ea. Blade (723054-A, 723066-A)
Plastic tool case (824734-9)
Length of stroke
1-1/4"

Strokes per minute
0 - 2,800

AMPS
12.0

Length
19-1/8"

Net Weight (lbs.)
9.3

Shipping Weight (lbs.)
17.20

UPC Code
088381061315

Makit JR3060 Recipro Saw Parts and breakdown

Diamond Coring Rig with Small Base Stand, Vac-U-Rig® Kit, Meter Box and Diamond Coring Motor 4115-22

The Milwaukee Advantage
This contractor series small base stand features a cast aluminum base with 4 leveling screws for fast accurate leveling adjustment. The durable precision-ground 2-1/2 in. steel column is 43-1/2 in. high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side. Model 4115-22 comes with model 4096 coring motor, Vac-U-Rig® kit as well as a meter box. The Vac-U-Rig® assembly uses a vacuum pump to apply suction to a large pad mounted on the bottom of the rig. This aids in stability when coring holes.
Features
Comes with 4096 Diamond Coring Motor
Cast aluminum base with four leveling screws for fast accurate leveling adjustment
Durable precision-ground 2-1/2 in. steel column, 43-1/2 in. high.
Rear mounted rack and pinion feed.
Specifications
Height
43-1/2 in.
Angle Drilling
No
Wheels
Yes
Vac Base
Yes
Vac Pump
Yes
Motor
Yes
Meter Box
Yes
Tool Weight
111.5 lbs.
Shipping Weight
139.8 lbs

Hitachi DS18DL 18V 3.0Ah Lithium Ion Cordless Driver Drill

Covered by Hitachi's 10-Year Lithium Ion Tool Warranty- click here to download the Lithium Ion Tool Warranty Brochure
(2)3.0 Ah HXP Lithium Ion batteries for three times the life at half the weight of NiCd and NiMH batteries
HXP batteries are backwards compatible with all Hitachi 18V DMR, DVF3 and DFL tools
Class leading 570 in/lbs of turning torque to power through the toughest jobs with ease and precision
Unique 2-step switch lets the user select from 4 speed settings (0-200/400/900/1800 RPM) for ultimate control
Externally accessible carbon brush for quick and easy maintenance
2-piece rare earth magnet motor for durability and power
Convenient 5-position belt hook features an integrated LED work light
Includes:
(2) 3.0Ah Lithium ion Batteries
Quick Charger
Side Handle
Carrying Case
Driver Bit

Hitachi Parts

Festool Kapex KS120 Miter Saw #561287

Capacity in a compact designThe Kapex is the most advanced sliding compound miter saw in the market today. In the hands of a carpenter, this saw will make cuts that rival the finest trim work being done today. Engineered to be lightweight and compact, the KS 120 is the perfect saw for the workshop or the jobsite. Effective dust extraction, precise cuts, easy adjustments, and quality components are some of the features that should make this saw the number one choice of professional tradesmen.

Dual LasersEasily align cuts from the left or right side of the Kapex using the dual lasers. The lasers clearly define the material which will be removed during the cut. Using the three axis adjustment controls, you have complete control to fine-tune the lasers. A conveniently placed button can be used to turn on the laser without powering on the saw. The lasers are electrically powered and require no batteries

Rail Forward DesignThe Kapex features a rail forward design which increases precision and creates a compact footprint. The rails are robust at 30mm in diameter and are wide apart. This prevents head play to ensure smooth, accurate cuts every time. The rail forward design also allow the Kapex to be placed against a wall while being used which saves valuable work space. The compact footprint also makes transport and storage easier.
Dust HoodThe Kapex features a dust hood which is responsible for directing the ejection of saw dust from the blade into the dust collection port. This pliable rubber hood arrests chips and helps the Kapex achieve up to 91% dust extraction when using a 36mm dust extractor hose reducing the time spent cleaning

Bevel Lock Knob
Use the Bevel Lock Knob conveniently located on the top of the Kapex to control the bevel positive detents and to lock the bevel angle. The counter spring balanced head on the Kapex allows you to position the bevel and let go of the saw with the head moving. Use the fine adjustment knob to control bevel angles in fractions of a degree.
The bevel knob has three settings: positive detents at 0 and -45 degrees, free movement between -45 and +45 degrees and free movement up to ±47 degrees. Bevels can be made to the left or right and the bevel gauge appears on both sides

Buy It Here...

Festool Trion PS300 EQ Jigsaw #561097

Designed to fit your hand with a low profile
Most jigsaws have a hard time staying on course. Hard material and curves can easily cause the blade to deflect, resulting in time consuming re-cutting or sanding. Trion jigsaws are designed with adjustable carbide-tipped jaws that work with the blade clamping system and back-up bearing for triple blade guidance that keeps the blade perpendicular to the shoe at all times, even on curves. The barrel grip PS 300 is designed to fit your hand with a low center of gravity.

MMC Electronics

Festool Jigsaws feature soft-start that softens start-up jolts, variable speed control so the blade speed can be matched to the material need, constant speed under load for consistent blade tip speed and improved cut quality.
FastFix Blade Changing SystemAllows for quick, tool-free blade changes. FastFix lever angles and opens the chuck for easy blade removal

Carbide Guidance SystemRigidly supports the blade at exactly the pre-set angle, reducing blade wander in tight radius cuts; eliminating cutting errors, spoiled workpieces, or need for rework

Buy It Here...

Festool Domino Joinery System DF500

The evolution of joinery
Joining has always been a slow, difficult process. Never again, thanks to the Festool Domino joining system. The system consists of the Domino joiner and pre-fabricated, beech and sipo Domino tenons. The Domino joiner, with its revolutionary cutting method, simple indexing features and adjustable mortise sizing, makes flawless mortises every single time. The Domino tenon is equally as impressive - it is 100% rotation-proof and far stronger than either biscuits or dowels. It also has a large gluing surface area for extra strength. The Domino joiner, with its revolutionary cutting method, simple indexing features and adjustable mortise sizing, makes flawless mortises every single time. The Domino tenon is equally as impressive—it is 100% rotation-proof and far stronger than either biscuits or dowels. It also has a large gluing surface area for extra strength.

Includes
DO MINO cutter D 5

Plug-it power cord

Support bracket

Systainer
SYS 2
Wrench

Specifications
Cutter spindle speed
24,300 rpm
DOMINO slot cutter diameter
Miter routing
0-90°; stop positions at 0°, 22.5°, 45°, 67.5°, 90°
Movable stepped stop
Power consumption
420 watts
Routing depth stop
Routing height adjuster with scale
Weight
7 lbs.

Buy It Here...

Porter Cable 10 Gallon Dust Extractor Vacuum

Powerful 9 Amp motor
Vacuum delivers 99.85% filtration efficiency - great for fine particulate pick-up, like drywall or solid-surface dust
Built-in outlet for use with power tools - vacuum starts automatically when tool is turned on
Includes 15 seconds vacuum overrun to clear hose when tool is turned off
Dual filtration system with washable automotive-type paper filter and 2-ply ten-gallon paper filter bag for dust pick-up
Corrosion resistant polypropylene tank
Large wheels for easy maneuvering
Convenient flat top surface tray for holding tools while working

Buy It Here...

PONY Clamp Fixture for 3/4" black pipe (pipe not included)

Style No. 50 Stock No. 50
This widely popular clamp fixture is designed to be used on ordinary 3/4" black pipe with the flexibility of creating any clamping length. Easy to assemble. Ideal for metalworking, woodworking and a wide range of applications from industrial to do-it-yourself type projects.
Features:
orange and/or black baked enamel finish castings of malleable and/or ductile iron
smooth 5/8" Acme cut steel threaded screw for secure hold and final tightening
tail-stop with multiple-disc-clutch for fast easy adjustments while holding work securely
coil-spring stop

Buy It Here...

GRABIT Screw Remover

Eliminate your frustration and easily extract damaged screws and bolts. • Made from high quality tool steel - GRABIT® removes screws and bolts from wood, metal or plastic.• GRABIT® extracts damaged screws and bolts made of almost any alloy, including soft brass screws.• Our patented two-step process can be attached to a reversible drill or used manually with a quarter inch hex nutdriver.

Buy It Here...