Hitachi NV65AH Siding Nailer, Coil, Wire/Plastic Sheet Collation

4.6lbs, lightweight and compact for easy maneuverability
Depth of drive adjustment to countersink or flush drive nails
Drives wire and plastic sheet collated nails for added flexibility
Adjustable air deflector, directs the air exhaust in any direction
No mar nose cap attachment protects material from accidental marks
Plastic shield, deflects wire collation for added safety
Long-lasting rubber grip, for added comfort
Optional accessory: single trip trigger mechanism
View the recommended fastener guide
Includes:
Safety Glasses
Hex Bar Wrenches

Fastener Type
Coil, Wire/Plastic Sheet Collation
Magazine Angle
16-Degrees
Fastener Length Capacity
1-1/2" - 2-1/2"
Fastener Diameter Range
.090 - .099
Magazine Capacity
200-300
Magazine Loading
Side
Air Inlet
3/8"
Operating Pressure
70-120psi
Actuation
Contact Optional Sequence
Air Consumption
.049(FT3/Cycle@100psi)
L x W x H
10-1/2" x 5-1/6" x 11-13/16"
Tool Weight
4.6lbs

Buy It Here

Evolution 7-1/4" TCT Multipurpose Circular Saw

A ground breaking circular saw featuring RAGE® technology (PATENT PENDING), it easily cuts Steel, Aluminum and Wood (even wood with nails), with the same blade. The cut is fast, clean, with virtually no burr or sparks. When cutting steel, the RAGE cuts cold, no coolant is required, and because the material is cold it can be handled and worked on immediately.
A combination of a Hi-torque motor and gearbox, heavy duty construction and ultra high grade TCT blade enables this saw to cut materials which simply weren’t possible before.
The blade life isn’t sacrificed either, even when cutting tough materials. A blade can cut up to 164 feet of 1/4" mild steel* before a replacement is required. This is a truly innovative product breaking new ground in the power tool market.
Why would you buy a saw that only cuts wood? When you can buy a RAGE® Multipurpose Saw.

Buy It Here...

DeWalt Heavy-Duty VSR Drywall Screwdriver - DW272

Features:
Metal gear housing for increased durability
Depth sensitive "set and forget" nosepiece for consistent fastener depth
Rubber grip and two-finger trigger for increased comfort
Helical-cut steel, heat-treated steel gears for long life and durability
Lightweight with excellent ergonomics
Warranty Information

Amps =6.3 Amps
No Load Speed =0-4,000 rpm
Clutch =Standard
Torque =81 in-lbs
Max Fastener Size =#8
Tool Weight =3.1 lbs

Buy It Here>>

Porter Cable 7-1/4" 13 Amp Laser Circular Saw

Heavy-duty 13A motor provides power and torque for any job
Ball bearing construction provides longer tool life and accuracy
kerf cut indicator aligns the blade to the indicator for accurate line cuts
Bevel adjustment allows for a variety of cutting applications and uses
Depth adjustment allows for cutting depth control
Soft grips rear handle and boot minimizes vibration for prolonged cutting
24 tooth carbide blade provides best cutting performance in a variety of materials
Laser guide aligns the blade to the cut line
Motor:
Amps: 13 Amps
Speed: 5,000 rpm
Blade Diameter: "7 1/4"
Arbor:
Capacity at 45 Degree Cut: 1-13/16 "
Capacity at 90 Degree Cut: 2-3/8 "

Buy It Here

Bosch 12V Max Multi-X™ Cutting Kit

Features
Versatile, Flexible in Applications and Materials - No-Mar Plastic Nose - Protects work piece Corded performance for cutting, sanding and other applications

Broad Range of Bosch Accessories
Screw to Tighten Accessories - For a strong connection
Tool Holder with Variable Angle Adjustment within 240°
Ergonomic Design with Small Perimeter and Soft-Grip - For fatigue reduced working
Litheon™ 12V Max Batteries - Advanced Lithium-ion technology for optimal battery life, runtime and power
Fuel Gauge - For charge control
Variable Speed Dial - For sanding speed adjustments Includes
(1) -- Hard Carrying Case
(2) -- Litheon™ 12V Max Batteries -- BAT411
(1) -- 30 Minute Charger -- BC430
(1) -- Adapter
(1) -- Sanding Triangle
(1) -- Sanding Pad - SDP001
(1) -- HCS Plunge Cut Blade (1-5/8x1-1/2)

Buy It Here

JET JHL-610 Hobby Lathe 321200

Details
Electronic Variable Speed 100-2000RPM
Over-load protection
Leadscrew is protected under the bed with auto-feed mechanizam
Three jaw chuck
Dead center MT1
Wrench Set
Oil Can
Metal cuttings/shavings/coolant tray inbuilt
Chuck cover (guard) with a automatic off/on switch for safety feature
Cross-slide has an industrial-style bolt-down heavy cast-iron tool holder with calibrated feed
Tailstock has an MT-1 and is made from cast-iron
Headstock center (MT-2) and drill chuck (MT-1) are included as a standard equipment
Capable to cut metric thread 0.5-1.25mm pitch
Capable to cut inch thread 16-24 TPI
Gear change kit is included as a standard equipment

Spindle Mount=MT2
Spindle Taper W/ Sleeve=MT-2
Number of Spindle speeds
Electronic Variable Speed
Range of Spindle Speeds (RPM)=100 - 2000
Number of Inch Threads=5
Range of Inch Threads (TPI)= 16/24
Number of Metric Threads=5
Range of Metric Threads=0.5-1.25
Max Tool Size (in.)=3/8-shank
Cross Slide Travel (in.)=2
Carriage Travel (in.)=9-3/4
Taper in Tailstock Spindle=MT-1
Motor=150W

HEAVY METAL SAVINGS EVENT
This item is on promotion in our 2009 HEAVY METAL Savings Event.Now is the opportunity you've been waiting for. SAVE BIG - UP TO 30% on the best Metalworking, Workholding, Hand Tools, Air Tools, Overhead Lifting, and Warehouse & Dock tools in the industry.Click Here for Promo Details

WARRANTY AND SERVICEWMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. Specifications

Buy It Here

Variable Speed Granite Mini-Lathe 60100G

Solid Granite Bed and Head Stock: A Steel City exclusive, the granite bed and head stock gives you the added weight you need for a lathe and will never twist, warp, rust or corrode.
2 Speed Variable Speed: 500 to 3,800 RPM allows for maximum torque when turning at lower speeds.
12" Swing Over the Bed: Allows you to create a variety of decorative projects up to 12" in diameter.
27" Between Centers: The largest of any small lathes allows ample capacity for turning without the need for a bed extension.
External Hinged Access Doors: Allows for quick access to belts and pulleys for changing speeds or replacement of belt.
Standard Equipment:
Includes a 1/2 HP, single phase, 115V DC motor, push button switch with variable speed control, 6" tool rest, ball bearing live center, spur center, 3" face plate, knockout bar, wrenches and user manual with parts list

Motor:
1/2 HP DC, 115V, 60 Hertz
Switch:
Push Button with Variable Speed Control
Speeds:
500 to 1,350 Low, 1,400 to 3,800 High
Swing Over Bed:
12"
Swing Over Base:
9"
Distance Between Centers:
27"
Drive Spindle:
1" - 8 RH Thread
Drive Spindle Thru Hole:
3/8"
Head and Tailstock Taper:
#2 MT
Tailstock Thru Hole:
3/8"
Tailstock Spindle Travel:
2 1/2"

Buy It HERE