Delta 16-1/2" Crosshair Laser Drill Press17-950L
The 17-950L includes 1/2 HP, 120 Volts, 60 Hz, 1,720 RPM induction motor, fully adjustable laser pod, flexible lamp, tilting table, adjustable, locking depth stop, rack and pinion table raising/lowering mechanism, 5/8" capacity chuck and key, belt and pulleys, column and base stand.
The 17-950L includes 1/2 HP, 120 Volts, 60 Hz, 1,720 RPM induction motor, fully adjustable laser pod, flexible lamp, tilting table, adjustable, locking depth stop, rack and pinion table raising/lowering mechanism, 5/8" capacity chuck and key, belt and pulleys, column and base stand.
Flexible lamp provides extra light to the work surface
Adjustable-position locking depth stop for accurate depth measurement and repetitive drilling
Bright laser crosshairs clearly indicate the drill point
9 Volt battery needed for crosshair lasers (battery not included)
14" x 18" woodworker-friendly table includes T-Slots, a removable insert and tilts 0-45° forward and 0-90° left and right with positive stops at 0°, 45°, and 90°
Industrial induction motor for long-lasting, smooth performance
Twelve speeds for drilling a wide variety of woods, plastics and metals
Three-spoke pilot wheel for operator convenience
Adjustable-position locking depth stop for accurate depth measurement and repetitive drilling
Bright laser crosshairs clearly indicate the drill point
9 Volt battery needed for crosshair lasers (battery not included)
14" x 18" woodworker-friendly table includes T-Slots, a removable insert and tilts 0-45° forward and 0-90° left and right with positive stops at 0°, 45°, and 90°
Industrial induction motor for long-lasting, smooth performance
Twelve speeds for drilling a wide variety of woods, plastics and metals
Three-spoke pilot wheel for operator convenience
Motor: 1/2 HP, 120V, 1 Phase, 60 Hz, 1,720 RPM
Motor Control: On/Off Toggle
Speeds: 12 (250; 360; 410; 540; 590; 650; 1,090; 1,280; 1,450; 1,820; 2,180; 3,000 RPM)
Table Size: 18" x 14 "
Table Tilt: L & R: 0-90°; Forward: 0-45 °
Table Insert: 3-3/4" x 3-3/4"
Column Diameter: 3.15 "
Spindle Taper: #2 Morse Taper
Chuck Taper: Jacobs 3
Quill Diameter: 2 "
Quill Stroke: 3-7/8 "
Key Chuck Capacity: 5/8 "
Chuck to Table Capacity: 27 "
Chuck to Base Capacity: 47 "
Height: 66 "
Width: 12.75 "
Depth: 25.25 "
Weight: 194 lbs
Shipping Weight: 209 lbs
Motor Control: On/Off Toggle
Speeds: 12 (250; 360; 410; 540; 590; 650; 1,090; 1,280; 1,450; 1,820; 2,180; 3,000 RPM)
Table Size: 18" x 14 "
Table Tilt: L & R: 0-90°; Forward: 0-45 °
Table Insert: 3-3/4" x 3-3/4"
Column Diameter: 3.15 "
Spindle Taper: #2 Morse Taper
Chuck Taper: Jacobs 3
Quill Diameter: 2 "
Quill Stroke: 3-7/8 "
Key Chuck Capacity: 5/8 "
Chuck to Table Capacity: 27 "
Chuck to Base Capacity: 47 "
Height: 66 "
Width: 12.75 "
Depth: 25.25 "
Weight: 194 lbs
Shipping Weight: 209 lbs
Delta Parts 17-950L
No comments:
Post a Comment