Horizontal Boring Machine Delta 32-350
The 32-350 includes 1 HP, 3,450 rpm, 115/230V, 1 Phase Motor, adjustable hold-down clamp with see-thru guard, cast-iron table with dovetailed miter gauge slots, miter gauge, adjustable stock stop, adjustable boring head, drill bit adapter, steel cabinet, foot pedal, dust chute, wrenches.
The 32-350 includes 1 HP, 3,450 rpm, 115/230V, 1 Phase Motor, adjustable hold-down clamp with see-thru guard, cast-iron table with dovetailed miter gauge slots, miter gauge, adjustable stock stop, adjustable boring head, drill bit adapter, steel cabinet, foot pedal, dust chute, wrenches.
Adjustable hold-down clamp and boring head are pneumatically controlled by a foot pedal to keep operator's hands free
See-thru guard protects from flying woodchips
Heavy cast-iron table features dovetailed miter gauge slots for keeping miter gauge secured when locked in place. Also with standard-equipped stock stop for operations that require repetitive drilling.
Loosening the nut just below the boring head allows the operator to quickly adjust the depth stop for final drilling depth
Guide rails are concealed inside flexible rubber tubing for protection against dust and chips
Tough cast-iron table is mounted on dovetail ways with an adjustable gib. The four bolts located on the right-hand side may be adjusted to compensate for wear.
Aluminum Boring Head contains two adjustable spindles
Easy-to-read scales and reference lines for accurate setting
Convenient grease fitting accepts standard grease gun for lubricating boring head
Built-in chip chute directs dust and debris away from machine
Cast-iron carriage supports motor and boring head
Adjustable feed rate knob controls boring speed at which the drill bits enter the work piece
Fabricated steel cabinet has bolt-down feet for operating stability
See-thru guard protects from flying woodchips
Heavy cast-iron table features dovetailed miter gauge slots for keeping miter gauge secured when locked in place. Also with standard-equipped stock stop for operations that require repetitive drilling.
Loosening the nut just below the boring head allows the operator to quickly adjust the depth stop for final drilling depth
Guide rails are concealed inside flexible rubber tubing for protection against dust and chips
Tough cast-iron table is mounted on dovetail ways with an adjustable gib. The four bolts located on the right-hand side may be adjusted to compensate for wear.
Aluminum Boring Head contains two adjustable spindles
Easy-to-read scales and reference lines for accurate setting
Convenient grease fitting accepts standard grease gun for lubricating boring head
Built-in chip chute directs dust and debris away from machine
Cast-iron carriage supports motor and boring head
Adjustable feed rate knob controls boring speed at which the drill bits enter the work piece
Fabricated steel cabinet has bolt-down feet for operating stability
Motor: 1 HP, 3,450 rpm, 115/230V, 60 Hz, 1 Phase
Drive:
Speed: 3,450 rpm
Stroke: Drill Stroke: 3-7/8 "
Throat Capacity: "
Center Distance of Spindles: 3/4"-3" "
Table Size: 15-3/4"x9-7/8 "
Length: 37.5 "
Width: 15.75 "
Height: 48 "
Weight: 303 lbs
Shipping Weight: 303 lbs
Drive:
Speed: 3,450 rpm
Stroke: Drill Stroke: 3-7/8 "
Throat Capacity: "
Center Distance of Spindles: 3/4"-3" "
Table Size: 15-3/4"x9-7/8 "
Length: 37.5 "
Width: 15.75 "
Height: 48 "
Weight: 303 lbs
Shipping Weight: 303 lbs
No comments:
Post a Comment